Remington model 40XB questions

[claremont]

I hope that I'm posting this in the correct place. I have a Remington 40XB-KS. It's chambered for the 308 (7.62 x 51 Nato), bolt action It was built at the Remington Custom Shop back in the mid 90's. It has a black Kevlar Stock as well as a stainless heavy barrel, both from the custom shop. It's scoped with a Leopold BR-36X. All components in excellent condition, almost brand new in box condition, unsure about amount of rounds fired through it though, say, less than 200 for estimate's sake. It in NOT a BR, bench rest nor tactical stock. No hard case either.

Question 1: What dies the "B" stand for in "40XB"? Is it for bolt?

Question 2: Sort of a general question, without looking at it directly. What would be a high and low dollar value for this?

Many thanks!

[russ69]

I think it's a 40X and the B stands for heavy barrel as you could get sporter weight barrels back in the day. The KS is for the Kevlar stock, I think. I once ordered a 40XB-R that meant it was a repeater. Is yours a single shot?
I have no idea as to value. As a target shooter having owned two 40Xs, I would want to see the factory test target, or shoot the gun myself before I would make an offer. Some 40Xs are great shooters and some are not. Does it have a stripper clip guide? Is it a SS receiver or blue?
I might be a little low but somewhere around 800 bucks for just the rifle would be my guess. If I had it in my hands and it was a really good shooter, I would go more.

[Switchbarrel]

Sounds like the same rifle "donkeypunch0420" is asking about below.

[LynnJr]

Model 40-XB KS
Stock: Aramid fiber reinforced fiberglass; non-reflective, matte black finish; straight comb with cheekpiece; solid, flat-bottom fore-end; 1" black recoil pad; sling swivel studs.
Length of Pull: 13 1/2"
Drop at Comb: 1/2"
Drop at Heel: 1/2"
Metal Finish: Uncolored stainless steel. Blued receiver on L-H models.
Receiver: R-H models: stainless steel; L-H: carbon steel; drilled and tapped for scope mounts. Barreled action hand-fitted and epoxy-bedded to stock.
Trigger: Externally adjustable from 1 1/2 to 3 1/2 lbs. Special 2-oz. trigger available as an extra option for single-shot models.
Magazine Cap.: Single shot or 5 round repeater, loadable from stripper clip.
Barrel: 27 1/4" stainless steel; no sights.
Muzzle Diameter(Nominal): 7/8"
Overall Length: 47"
Weight: 10 1/4 lbs.