Tweet
I have a Remington 700 30-06 ADL that I purchased in 1996. I installed a Leupold one piece scope mount and verified it was manufactured for a long action rifle. Is it normal for the back end of the mount to slightly hang over the ejection port? You can see the two screws for adjusting windage are hanging over the back end of the ejection port about half a inch. This seems to be the correct model mount for this type of rifle. Thank you for any help.
-
-
Yep, normal. Same thing on my Winchester 70 with a Leupold STD mount."San Francisco Liberal With A Gun"
F***ing with people's heads, one gun show at a time. Hallelujah!
http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
http://www.liberalsguncorner.com (podcast)
http://www.youtube.com/sfliberal (YouTube channel)
----------------------------------------------------
To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism. -
Thank you for the reply. I figured so much.Comment
-
Yes , it’s normal but double check that the shells eject ok. Good luck.Comment
-
Same as on my Mod 70 also. You should be fine.
MLCComment
-
It's an odd visual I agree, but I have a Rem 700 with those mounts and GTG.Buy made in USA whenever possible.Comment
There are currently 13467 users online. 153 members and 13314 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment