Unconfigured Ad Widget

Collapse

M2M's lefty .308 Rifle project

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MissiontoMars
    Senior Member
    • Aug 2012
    • 1544

    M2M's lefty .308 Rifle project

    UPDATED PICS - POST #38

    Well, after a couple years of enjoying and buying other guns (AR's, Rugger PCC, etc.) I've finally plunked down the $$$ for a left-hand bolt gun, just for me. After much research, deliberation and lots of input(thank you, Calguns), I realized that i REALLY do like to tinker, really DO expect to change aspects of this gun over time, and therefore, should probably set myself up for success by choosing the gun with the biggest aftermarket by far.

    So, as we speak, a brand-spanking new, Left-hand Remington 700 SPS Varmint in .308 is now whisking it's way to my LGS:



    wm_2670081.jpg


    There are only 3 options from Remington in LH 700 rifles. This one was chosen, specifically for the heavier barrel, because as much as think i MIGHT get out hunting one of these years, this is definitely going to primarily be a mid-range paper-puncher and steel-ringing fun gun. Not too worried about weight, and I might end up appreciating the heft for long, desert shooting sessions. Anywho, you might be since it's a going to be a pretty vanilla build on a fairly common rifle, but I'm STOKED. Going to be looking at glass in the near future. Also considering a new trigger, but I have a nice bipod and a chassis already sitting waiting.

    Plan is to set the rifle up with scope base, scope and bipod and shoot it as-is to see what ammo it likes best, THEN, I'll swap over to the chassis to see how much improvement I get. Fun stuff.
    Last edited by MissiontoMars; 12-20-2020, 7:22 PM.
  • #2
    ar15barrels
    I need a LIFE!!
    • Jan 2006
    • 57157

    If you got a 308, they get MUCH nicer to shoot once you put a muzzle brake on them.
    I'm here when you are ready.
    Randall Rausch

    AR work: www.ar15barrels.com
    Handguns: www.handgunbarrels.com
    Bolt actions: www.700barrels.com
    Foreign Semi Autos: www.akbarrels.com
    Most work done while you wait on a scheduled shop visit.

    Comment

    • #3
      MissiontoMars
      Senior Member
      • Aug 2012
      • 1544

      Originally posted by ar15barrels
      If you got a 308, they get MUCH nicer to shoot once you put a muzzle brake on them.
      I'm here when you are ready.
      Yessir, .308. And 10-4, do you have any recommendations on type or brands for me to check out?

      Comment

      • #4
        ar15barrels
        I need a LIFE!!
        • Jan 2006
        • 57157

        Originally posted by MissiontoMars
        Yessir, .308. And 10-4, do you have any recommendations on type or brands for me to check out?
        I recommend a custom made brake from Ross Schuler.


        It's not expensive and does not have a fancy logo engraved on it but it works as good as any other muzzle brake including the ones that won the various muzzle brake comparisons.
        Randall Rausch

        AR work: www.ar15barrels.com
        Handguns: www.handgunbarrels.com
        Bolt actions: www.700barrels.com
        Foreign Semi Autos: www.akbarrels.com
        Most work done while you wait on a scheduled shop visit.

        Comment

        • #5
          MongooseV8
          Veteran Member
          • Apr 2010
          • 4426

          2nd Ross Schuler brakes. All performance with no fancy marketing gimmicks.

          Comment

          • #6
            MissiontoMars
            Senior Member
            • Aug 2012
            • 1544

            The only pricing I'm seeing on those Ross brakes, is $37.00 - Is that correct? That seems like a fantastic deal.

            I'm assuming the tip of my barrel would need to be threaded, correct? How much does that run?

            And do i want to leave the full 26" barrel intact? I lean towards a shorter barrel, but I don't want to hamstring myself by lopping off too much.

            Comment

            • #7
              JackEllis
              Veteran Member
              • Nov 2015
              • 2731

              Originally posted by ar15barrels
              If you got a 308, they get MUCH nicer to shoot once you put a muzzle brake on them.
              I'm here when you are ready.
              Only if you're the shooter. For anyone in adjacent bays, they're a nightmare.

              Nothing personal but I absolutely detest muzzle brakes.

              If you're worried about recoil, here are two suggestions. First, have the riffle fitted with a recoil pad. Second, when it's cold out a coat provides extra padding. When it's warm out, use a shoulder pad like this one. My shoulder pad used to be sold by Cabelas - not sure if they still sell them.

              I have a .30-06 and used to hate shooting it because the kick was so bad I'd come home with a black-and-blue shoulder. The combination of a recoil bad and some padded clothing made all the difference.

              Forget the muzzle brake. Nearby shooters will thank you.

              Comment

              • #8
                MissiontoMars
                Senior Member
                • Aug 2012
                • 1544

                Originally posted by JackEllis
                Only if you're the shooter. For anyone in adjacent bays, they're a nightmare.

                Nothing personal but I absolutely detest muzzle brakes.

                If you're worried about recoil, here are two suggestions. First, have the riffle fitted with a recoil pad. Second, when it's cold out a coat provides extra padding. When it's warm out, use a shoulder pad like this one. My shoulder pad used to be sold by Cabelas - not sure if they still sell them.

                I have a .30-06 and used to hate shooting it because the kick was so bad I'd come home with a black-and-blue shoulder. The combination of a recoil bad and some padded clothing made all the difference.

                Forget the muzzle brake. Nearby shooters will thank you.

                Comment

                • #9
                  ar15barrels
                  I need a LIFE!!
                  • Jan 2006
                  • 57157

                  Originally posted by MissiontoMars
                  The only pricing I'm seeing on those Ross brakes, is $37.00 - Is that correct? That seems like a fantastic deal.

                  I'm assuming the tip of my barrel would need to be threaded, correct? How much does that run?

                  And do i want to leave the full 26" barrel intact? I lean towards a shorter barrel, but I don't want to hamstring myself by lopping off too much.
                  That's correct.
                  Keep all 26" of barrel.
                  Shortening it only hurts velocity and increases recoil and muzzle blast.

                  $100 to thread the muzzle and time the brake/barrel on a scheduled walk-in appointment at my shop.
                  Randall Rausch

                  AR work: www.ar15barrels.com
                  Handguns: www.handgunbarrels.com
                  Bolt actions: www.700barrels.com
                  Foreign Semi Autos: www.akbarrels.com
                  Most work done while you wait on a scheduled shop visit.

                  Comment

                  • #10
                    ar15barrels
                    I need a LIFE!!
                    • Jan 2006
                    • 57157

                    Originally posted by MissiontoMars
                    For me, .308 is not painful at all, even in the light mvp scout rifle, i just rented recently,
                    but thats not to say it doesnt make me flinch, which is the main reason i’d consider one...
                    Getting rid of the flinch is critical to give your full concentration to making good shots.
                    Muzzle brakes also let you see your impacts which can not be said of recoil pads or heavy clothing.
                    Seeing where your shot landed is very important.
                    Without a brake, the gun jumps so far off target that you won't see your impacts until you are shooting 600+yards.
                    Randall Rausch

                    AR work: www.ar15barrels.com
                    Handguns: www.handgunbarrels.com
                    Bolt actions: www.700barrels.com
                    Foreign Semi Autos: www.akbarrels.com
                    Most work done while you wait on a scheduled shop visit.

                    Comment

                    • #11
                      MissiontoMars
                      Senior Member
                      • Aug 2012
                      • 1544

                      Originally posted by ar15barrels
                      That's correct.
                      Keep all 26" of barrel.
                      Shortening it only hurts velocity and increases recoil and muzzle blast.

                      $100 to thread the muzzle and time the brake/barrel on a scheduled walk-in appointment at my shop.
                      Cool and the gang. thanks.

                      Comment

                      • #12
                        MissiontoMars
                        Senior Member
                        • Aug 2012
                        • 1544

                        Originally posted by ar15barrels
                        Getting rid of the flinch is critical to give your full concentration to making good shots.
                        Muzzle brakes also let you see your impacts which can not be said of recoil pads or heavy clothing.
                        Seeing where your shot landed is very important.
                        Without a brake, the gun jumps so far off target that you won't see your impacts until you are shooting 600+yards.
                        Good to know.

                        Comment

                        • #13
                          MissiontoMars
                          Senior Member
                          • Aug 2012
                          • 1544

                          Just got the call. Order’s in. SCHWEEET. Gonna go in and start DROS asap.

                          Comment

                          • #14
                            MissiontoMars
                            Senior Member
                            • Aug 2012
                            • 1544

                            Well picked her up, and have to say, i’m stoked! Going to be ordering a scope, base and rings soon.

                            So many options!

                            Comment

                            • #15
                              Newguy1980
                              Junior Member
                              • Oct 2019
                              • 45

                              Don't know what your budget is... but it seems like the bushnell nitro/forge scopes offer a lot for their money - especially considering their current 29%off rebate that expires at the end of the month.

                              Comment

                              Working...
                              UA-8071174-1