Unconfigured Ad Widget

Collapse

.308 accuracy issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Cody
    Senior Member
    • Jul 2009
    • 2148

    Originally posted by Dave626
    Buy a box of federal gold match
    ^ This. If the problem goes away then you know it was the ammo. If not then you have other problems, but I bet it is the ammo.

    Comment

    • #17
      bergmen
      Senior Member
      • May 2011
      • 2494

      Originally posted by LynnJr
      The scope should be pulled off of the rifle and the base should be tightened down a second time.
      After that put the scope and rings back on it and re-tighten everything down.
      Then switch to a premium ammo
      In a highly accurate rifle even cheap ammo shoots halfway decent.
      Also, apply a tiny amount of blue Loctite (or other thread locker, not the permanent type) to all of the scope mount screws. This will keep them from working loose.

      Dan

      Comment

      • #18
        Varg Vikernes
        Veteran Member
        • Jan 2012
        • 2831

        Guessing its one of these then:



        Looks like a relatively thin barrel. Could be ammo, and stringing because of lighter profile barrel.

        Comment

        • #19
          Kwikvette
          Veteran Member
          • Oct 2015
          • 3704

          1. It's you; most guns are more accurate than the shooter behind it will ever be.

          2. Your scope rings could add to the issue. As someone posted above, make sure everything's nice and tight. Ensure it's level too.

          3. Ammunition; you're shooting some really cheap stuff. It should group well, but not well enough to brag about. Since you mentioned a few shots were way off, I'd venture to visit points 1 and 2.

          Where are you located anyway? I'm sure a few calgunners near you could offer some pointers.
          Originally posted by longrange1
          my gun shoots better with shiny brass...plus not only does the shiny brass make me look like a pimp at the range if the sun catches it just right it blinds the guy next to me which improves my odds of winning the match.
          Originally posted by XDJYo
          Full size. Stubbies are for sissies.

          Comment

          • #20
            bootstrap
            Senior Member
            • Jul 2015
            • 1239

            Tula is known to have large deviations in powder charge. I would not use it for precision shooting.

            Also, what's your barrel's twist rate? I'd guess 1:10. If so, use at least 168 grain bullets.

            Comment

            • #21
              jdben92883
              Veteran Member
              • Dec 2012
              • 3635

              If they are torqued properly, they will not come loose.

              Originally posted by bergmen
              Also, apply a tiny amount of blue Loctite (or other thread locker, not the permanent type) to all of the scope mount screws. This will keep them from working loose.

              Dan
              NRA Benefactor Member

              Comment

              • #22
                Divernhunter
                Calguns Addict
                • May 2010
                • 8753

                Years ago I used the locktite. I learned my lesion and no longer do. I have not used it in years and have never had a scope come loose. I "personally" see no need to use it. I have done hundreds of scopes for myself and friends with no troubles. The plus to not using it is that if you want to change scopes/bases it is much easier.
                I have learned to lap the rings and find that helpful for full(er) contact between rings and scope tube.
                A 30cal will reach out and touch them. A 50cal will kick their butt.
                NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                Comment

                • #23
                  mif_slim
                  I need a LIFE!!
                  • Apr 2008
                  • 10089

                  I pulled some steel ammo a while back to Mexican reload some rounds... I measured 20 of the round and the powder deviated 4grs. That is a lot!!
                  Originally posted by Gottmituns
                  It's not protecting the rights of the 1%, it's IMPOSING new laws because of the 1%.

                  Comment

                  • #24
                    Wren1911
                    Member
                    • Feb 2017
                    • 190

                    I’m no pro,I just enjoy shooting as much as I can.There is a lot that goes into shooting a good group.

                    Things that come to mind when I read this.

                    Ammo:Use some match grade ammo.Buy a few different brands and grain weights.Do alittle research and find out what twist rate your barrel is and find out what the heaviest projectile your twist rate can stabilize and don’t exceed it.It is ok to shoot lighter bullets then the max your twist rate will allow.You may find out your rifle likes the lighter bullets.

                    Barrel:What contour does your barrel have?If it’s a thinner barrel that will play into it.For example my 308 browning xbolt hells canyon speed has a very thin fluted barrel.Cold bore it is dead on,2nd and 3rd are all over the place.If I let it cool it’s dead on again.Dosnt bother me it’s a light weight hunting rifle.Just makes it a pain to sight in.

                    Support:How are you shooting the rifle?Standing from the shoulder,From a gun rest,bipod and bags?You want stable and repeatable.

                    Shooter:What is your skill level?Breathing,flinching,How you hold the rifle all play into it.

                    Comment

                    • #25
                      Opoponax
                      Junior Member
                      • Feb 2017
                      • 40

                      Originally posted by LynnJr
                      In a highly accurate rifle even cheap ammo shoots halfway decent.
                      That's been my experience too.

                      I run Tula through my AK, and for that purpose it's fine. It's not supposed to be precision rifle, so really fine ammo isn't necessary (for my purposes with that particular gun).

                      That said, I'd never run that stuff through any of my bolt actions.

                      I also want to reaffirm what others have said: the scope mounts may be loose and that'll play hell with accuracy as close as 25 yards.

                      Comment

                      • #26
                        Ej6fade
                        Senior Member
                        • Jun 2015
                        • 786

                        ...
                        Last edited by Ej6fade; 02-28-2019, 12:52 PM.

                        Comment

                        • #27
                          FishnHunt
                          Senior Member
                          • Mar 2015
                          • 1112

                          Nothing wrong with using cheap ammo to get on target or blowing big stuff up.. but that’s where it ends.
                          Trying to dial in your rifle with Tula ammo....well that’s another story.
                          Live and learn.
                          At least the blue box of the federal or federal fusion might be the best bang for the buck.
                          The ttsx are not cheap but they are consistent and legalmto hunt.
                          All of them do something better than the 30-06, but none of them do everything as well.

                          Comment

                          Working...
                          UA-8071174-1