If I remove my Rem 700 action from the stock with the scope still attached, will it affect zero when I reinstall it. This is assuming the scope mount stays undesturbed and I don't drop the damn thing.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Really Stupid Question
Collapse
X
-
No
Sent from my SM-G920P using Tapatalk -
It depends on how good the bedding is.
If the Remington is the older style with the pressure point in the forearm, then it will usually affect the return to POI, sometimes drastically.
If it's a free floated barrel and you have pillars or an aluminum bedding plate installed and you use a torque driver to tighten the action screws to a known value, then it should affect it less.NRA Endowment Life MemberComment
-
If the barrel isn't floated it could effect harmonics is you don't get the stock back on exactly as it was. Could effect accuracy out past 300.Comment
-
It doesn't matter.
You still need to check the zero afterwards to be sure! Don't assume anything.
Pastor Bill
"Unless I am convinced by Scripture and plain reason- I do not accept the authority of popes and councils [i.e. any man]- my conscience is captive to the Word of God." Martin LutherComment
-
It should not matter. But it could...God so loved the world He gave His only Son... Believe in Him and have everlasting life.
John 3:16
NRA,,, Lifer
United Air Epic Fail Video ...
https://www.youtube.com/watch?v=u99Q7pNAjvgComment
-
My Remington 700 PSS accuracy and zero is affected when I remove the action and torquing the action screws less than 42 in/lb. I get a repeatable zero and accuracy at 54 in/lb. When reinstalling my action I turn the action screws just finger snug then bounce the butt of the rifle on the floor twice. That’s to make sure the recoil lug is mated where it meets with the stock. I torque the front screw first to 54 in/lb then the rear screw to the same torque. My stock is a skim bedded HS Precision with aluminum block bedding.The wise man said just find your place
In the eye of the storm
Seek the roses along the way
Just beware of the thorns... K. MeineComment
-
JTROKS
Cut a strip of newspaper about 1/4 inch wide and put it under the bolt handle and dry fire the rifle. Use one finger to hold the bolt handle down and pull on the piece of newspaper.
If it doesn't come right out you need to relieve the stock so it does as alot of those guns had that issue.Lynn Dragoman, Jr.
Southwest Regional Director
Unlimited Range Shooters Association (URSA)
www.unlimitedrange.org
Not a commercial business.
URSA - Competition starts at 2000 yards!Comment
-
Chances are it will, unless it's a fiberglass stock like an HS Precision.
A friend of mine had a rifle that was very accurate (6mm Remington). One day he wanted to show me what the underside of the action looked like. I told him a dozen times NOT to take it out of the stock but he poo-poo'd it and took it out anyway. When we went out to shoot it, it was probably a foot off at 100 yards.Comment
-
JTROKS
Cut a strip of newspaper about 1/4 inch wide and put it under the bolt handle and dry fire the rifle. Use one finger to hold the bolt handle down and pull on the piece of newspaper.
If it doesn't come right out you need to relieve the stock so it does as alot of those guns had that issue.The wise man said just find your place
In the eye of the storm
Seek the roses along the way
Just beware of the thorns... K. MeineComment
-
If you start thinking like a Free Man
You'll begin to feel like a Free Man
And pretty soon you'll begin acting like a Free ManComment
Calguns.net Statistics
Collapse
Topics: 1,870,789
Posts: 25,175,962
Members: 358,862
Active Members: 5,399
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 29844 users online. 162 members and 29682 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.



Comment