Unconfigured Ad Widget

Collapse

.308 Muzzle profile

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JaredKaragen
    Member
    • Jan 2014
    • 270

    .308 Muzzle profile

    I am going to be repairing a damaged barrel, and to do this, I will be cutting a 22" .308 barrel down to roughly 19.5".

    My curious question is, what are the best angles/dimensions to cut the muzzle end to once shortened?

    I know there's different types of cuts that come on different models; such as the Remington (Which this barrel originates from) seems to have a lip cut out of the inside diameter of the muzzle, with no real [discernible] bevel on the muzzle face itself.... but I know there's could be an optimal profile (range of angles, I believe two angles) to cut in the muzzle face itself to produce the least amount of bullet deflection for those long range shots.

    Any professional gunsmith advice is appreciated. Even better if you could provide some sort of blueprint or set of factory measurements. I have access to a CNC lathe; so it should be easy to cut any proper profile that I need.


    Since i'm doing this on a long range barrel, I am not going to simply chop and add a random profile to it like I did with my chopped 16" barrel I modified to legally make my 1911 here in CA so many years ago... Id like to retain as much accuracy as possible.


    If a new barrel didn't cost over $300; I'd just buy one; but alas; you gotta work with what you have... plus, its a free barrel to build off of. The rest of the barrel is fine.


    Thanks in advance.
  • #2
    rm1911
    Veteran Member
    • Jan 2013
    • 4073

    Gunsmiths usually have all this information. And oddly enough can do this quite easily. And oddly enough it's not an expensive operation. I recommend just having a gunsmith do it.
    NRA Life Member since 1990

    They're not liberals, they're leftists. Please don't use the former for the latter. Liberals are Locke, Jefferson, Burke, Hayek. Leftists are progressives, Prussian state-socialists, fascists. Liberals stand against the state and unequivocally support liberty. Leftists support state tyranny.

    Comment

    • #3
      ar15barrels
      I need a LIFE!!
      • Jan 2006
      • 57199

      90 degrees from the crown about 2/3 of the barrel wall thickness.
      Then step forward about 1/16" to create a nice recess to protect the crown.
      Make sure you setup the bore running concentric to the spindle, not the outside diameter.
      Randall Rausch

      AR work: www.ar15barrels.com
      Handguns: www.handgunbarrels.com
      Bolt actions: www.700barrels.com
      Foreign Semi Autos: www.akbarrels.com
      Most work done while you wait on a scheduled shop visit.

      Comment

      Working...
      UA-8071174-1