Unconfigured Ad Widget

Collapse

Issue with Rem.700 bolt. HELP !!!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 357shooter
    Senior Member
    • Jul 2010
    • 729

    Issue with Rem.700 bolt. HELP !!!!!

    Up date it was not the bolt-bolt works fine stock trigger works fine it was the Timney trigger and it has been sent back.

    I have a Rem. 700 sps tac. in 223. Here's what I have done put in a new spring
    then took it out and put the stock spring back in after the problem started also
    put in a timney trigger, removed it I though it was the trigger that was the issue
    put the stock trigger back in it also was firing when I would close the bolt, so I removed the triggers and just used the bolt and when I close the bolt with no trigger in it still firers how can that be I'm lost on this.

    Thanks for any help
    Last edited by 357shooter; 03-25-2017, 8:49 AM.
  • #2
    LeadFarmer74
    Veteran Member
    • May 2015
    • 3105

    Is the firing pin stuck? Without the trigger that's about the only thing it could be.
    NRA Lifer
    Originally posted by Click Boom
    I know your ban hammer is cold hammer forged and chrome lined, im not messin with it!

    Comment

    • #3
      357shooter
      Senior Member
      • Jul 2010
      • 729

      Originally posted by LeadFarmer74
      Is the firing pin stuck? Without the trigger that's about the only thing it could be.
      I don't believe so, how would you tell if it stuck?? with out putting a live round in it and see if it fired !!!!

      Comment

      • #4
        LeadFarmer74
        Veteran Member
        • May 2015
        • 3105

        I personally haven't ever used a 700 but if there is no trigger and you close the bolt on a live round and it fires then it has to be the firing pin. I'm not sure if it free floats or is spring actuated. That's what I would look at first.
        NRA Lifer
        Originally posted by Click Boom
        I know your ban hammer is cold hammer forged and chrome lined, im not messin with it!

        Comment

        • #5
          fx1974
          Member
          • Apr 2014
          • 438

          This is just a theory....

          With no trigger (sear) the firing pin is supposed to be at rest. If the gun is firing when you close the bolt something is holding back the firing pin just enough that when you close it, it slams in and fires.

          I am no gunsmith but that is from my experience working on the bolt/firing pin assembly.

          I would try to clean the bolt and firing pin assembly as well as the firing pin hole...

          Comment

          • #6
            357shooter
            Senior Member
            • Jul 2010
            • 729

            Originally posted by fx1974
            This is just a theory....

            With no trigger (sear) the firing pin is supposed to be at rest. If the gun is firing when you close the bolt something is holding back the firing pin just enough that when you close it, it slams in and fires.

            I am no gunsmith but that is from my experience working on the bolt/firing pin assembly.

            I would try to clean the bolt and firing pin assembly as well as the firing pin hole...
            I have had this bolt apart 3 or 4 times it is very clean I guess I will take it apart one more time maybe something get in side the bolt that is holding back the firing pin.

            Comment

            • #7
              jimmykan
              Veteran Member
              • Jan 2008
              • 3105

              So as you close the bolt slowly, you can see the cocking piece hold back then snap forward with enough force to ignite a primer? Even without a trigger installed?

              Comment

              • #8
                357shooter
                Senior Member
                • Jul 2010
                • 729

                Originally posted by jimmykan
                So as you close the bolt slowly, you can see the cocking piece hold back then snap forward with enough force to ignite a primer? Even without a trigger installed?
                Yes, I'm going to put up video so you guys can see what it is doing.

                Comment

                • #9
                  357shooter
                  Senior Member
                  • Jul 2010
                  • 729

                  OK can't get the video to work so here still pics. Also I put a peace of paper in the bolt face put a empty case in closed the bolt and it put a hole in the paper so
                  the bolt is not being held back. I see no reason why this is happening....
                  Last edited by 357shooter; 11-09-2017, 12:07 PM.

                  Comment

                  • #10
                    LynnJr
                    Calguns Addict
                    • Jan 2013
                    • 7959

                    The firing pin will drop every time without the trigger.
                    The trigger is what keeps the firing pin held back.
                    When you lift the bolt handle it rotates the shroud 90 degrees and rests the cocking piece on the bolt body.
                    When you close the bolt you move the shroud back that same 90 degrees and the cocking piece is now in the cutout area of the bolt body.
                    Without a trigger it drops.
                    Last edited by LynnJr; 03-23-2017, 7:32 PM.
                    Lynn Dragoman, Jr.
                    Southwest Regional Director
                    Unlimited Range Shooters Association (URSA)
                    www.unlimitedrange.org
                    Not a commercial business.
                    URSA - Competition starts at 2000 yards!

                    Comment

                    • #11
                      Madpyro
                      CGN/CGSSA Contributor
                      • Jun 2011
                      • 1368

                      without the trigger, there is nothing to hold the firing pin back as you cam the bolt. The sear piece on the trigger engages the cocking piece on the bolt. when you pull the trigger, the sear drops and releases the cocking piece/firing pin.
                      sigpic94th ENGR. BN. USAEUR 75-78 / N.R.A. Life Member / SASS / Mineral County SAR

                      Comment

                      • #12
                        baih777
                        CGN/CGSSA Contributor
                        CGN Contributor
                        • Jul 2011
                        • 5680

                        Randall ????
                        Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
                        I really miss the good old Pomona Gun Shows.
                        I'm Back.

                        Comment

                        • #13
                          357shooter
                          Senior Member
                          • Jul 2010
                          • 729

                          Originally posted by Madpyro
                          without the trigger, there is nothing to hold the firing pin back as you cam the bolt. The sear piece on the trigger engages the cocking piece on the bolt. when you pull the trigger, the sear drops and releases the cocking piece/firing pin.
                          You are right, I just figured that out, so I installed the Timney trigger back in and
                          it was still doing it, so I tried the stock trigger and it works fine :face palm: so
                          I'll ship the Timney back I did talk to them earlier and they said no problem just send it they will fix it or replace it. Thanks guys this stuff can make you go mad...

                          Comment

                          • #14
                            Hateca
                            Senior Member
                            • Oct 2005
                            • 677

                            With the trigger out the pin will fall. With the trigger in if the pin falls most likely the trigger is not adjusted properly, not enough sear engagement. Have someone that knows how to adjust the triggers for the Remington look at it.

                            Most likely your Timney is fine have it adjusted.
                            sigpic

                            "Those that don't shouldn't. Those that do should"

                            Comment

                            • #15
                              bsumoba
                              Veteran Member
                              • Sep 2012
                              • 4217

                              when you install the trigger, make sure the bolt assembly is removed. sounds like you have more of a trigger issue or an issue with installing the trigger.
                              Visit- www.barrelcool.com
                              The Original Chamber Flag and Barrel Cooler in 1
                              Instagram: barrelcool_

                              Comment

                              Working...
                              UA-8071174-1