Unconfigured Ad Widget

Collapse

...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    nedro
    Veteran Member
    • Nov 2014
    • 4130

    Originally posted by 1911cat
    I need some advice from the wise and mighty calgunners. I want to build a long range rifle in 300WM, budget for the rifle alone 3-4K, 3k for scope. I'm overwhelmed with so many choices, chassis vs stock, scopes, bipods, etc.
    Precision rifles aren't precise until you reload for it.
    It's a hell of an undertaking. And fun as hell at the same time. Good luck and remember, "A journey of a thousand miles starts with one footstep."

    Comment

    • #17
      Sig Marine
      Member
      • May 2011
      • 347

      In all honesty, if you're having to ask about a build, you're better off buying a factory rifle and learning to shoot and reload. Most guys I know who have ventured into precision long range do not shoot the first gun they had built. Not because it wouldn't shoot, but because "things" change; what you want now might be different later in time as you progress and gain more experience.

      Since you've got the funds, get a good factory gun with a good scope, take a class, learn to reload and then spend a lot of time on the range. Dollar for dollar, the Ruger Precision Rifle (RPR for short) in either .308 or 6.5 Creedmoor is a good place to start. Both calibers have good factory ammunition available with the .308 being the more common and available from most any store while the 6.5 Creedmoor is the more efficient but you need to plan ahead on buying ammo. This may change as more and more shooters are going to the 6.5 but I doubt it will be as commonplace as the .308.

      Other factory offerings in these calibers you might consider are Howa, Tikka and Savage.

      Comment

      • #18
        1911cat
        Member
        • Jul 2016
        • 355

        One last question, if any of you had a budget for an average shooting distance of 1000-1200 rifle of 3-4K, what would you buy? Would you build one or buy one already done?

        Comment

        • #19
          RobG
          Veteran Member
          • Dec 2006
          • 4887

          Originally posted by 1911cat
          One last question, if any of you had a budget for an average shooting distance of 1000-1200 rifle of 3-4K, what would you buy? Would you build one or buy one already done?
          Without hesitation I would call Marc at Spartan Precision and have him build me a .260. Marc is a hell of a rifle builder and nicer guy you will not find.

          Bolt action precision rifle maker for the hunter, competition shooter, weekend tack driver, and MIL/LEO.

          Comment

          • #20
            diver160651
            Senior Member
            • Feb 2012
            • 1764

            Need advice building my first precision rifle

            If I had that budget I my first decide and your distance requirements, I ask yourself these questions.

            1- will I start hand loading ?

            2- will I maybe want to hunt - this might not be on your radar but things change

            3- does shooting in varied conditions sound interesting..

            4- will you be target shooting and does shooting interactive steel plates hold more appeal than just paper?

            5- is barre life a concern. Figure $750 + to change

            6- would you like to be able to manage the recoil see what you hit

            7. Is ammo cost a concern

            If answered yes, to most of those then you probably want a field gun.

            From there, I might call a place like GAP that has semi customs in stock or LRI for complete builds (several other good choices) and see what builds they suggest. To augment the internet stuff.

            There are a lot of cartridges not mentioned and several that have been that you might have reasons to stay away from or gravitate towards.

            Picking every part yourself, without having an overall strategy and someone skilled to guide you, is risky.


            If your not reloading, I might (although I shoot mostly customs) get an RPR and get great glass. Putting the rest of the money in the shooting. (As stated by above by Sig Marine)

            Edited to add: when I started typing this post, the one above me wasn't there. Other than the caliber specifically, I'm saying the same thing. So plus one to the post about mine.

            Call a few of the guys that pump high-quality field guns out.

            If you're anywhere around the bay area, feel free to send me an email a if you want to shoot a little bit in those distances.


            Sent from my iPhone using Tapatalk
            Last edited by diver160651; 02-11-2017, 1:57 PM.
            D.I.Y. a Target Cam for ELR
            NOTE: images not all working correctly due to limitations on the site

            D.I.Y. Barricade simulator using RRS tripod.

            Comment

            • #21
              1911cat
              Member
              • Jul 2016
              • 355

              Excellent, thanks guys!!

              Comment

              • #22
                FourT6and2
                Senior Member
                • Dec 2012
                • 1928

                Go to Core Shooting or Bug Holes and buy all your parts and call it a day. Send them off to a smith of your choice. Done.

                Action: 1200
                Barrel: 340
                Stock/Chassis: 800
                Trigger: 200-300
                DBM (if you go with a stock): 350

                Subtotal: $2640 - $2990

                Scope rings: Seekins, Badger, Nightforce, Vortex, ARC, etc.
                Scopes: sky's the limit

                Then you'll need a bipod and a rear bag, unless you want an F-Class or bench gun or something.

                If you want a 700-pattern action, there are lots of choices: Defiance, Stiller, Big Horn, Mausingfield, Badger, Surgeon...
                Popular barrles are Bartlein, Kreiger, Brux, Hawk Hill...
                Triggers: Jewel, Timney, etc...
                DBM: Surgeon, badger, Seekins, etc...
                Stocks: McMillan, Manners
                Chassis: I don't know much about them, but the Masterpiece Arms BA looks nice



                Before you buy anything you MUST talk to your chosen rifle smith. They will tell you exactly how to spec everything.


                .
                Last edited by FourT6and2; 02-11-2017, 2:22 PM.

                Comment

                • #23
                  ElvenSoul
                  I need a LIFE!!
                  • Apr 2008
                  • 17431

                  For right around a grand you can Remage and if necessary later true up the reciever.
                  sigpic

                  Comment

                  • #24
                    BigBamBoo
                    Calguns Addict
                    • Apr 2008
                    • 5215

                    For $3000.00 and if you do NOT reload....you could do a lot worse then this:



                    On the shelf, ready to go. And if you do decide to order one...call and ask for Jason. Tell him your a member of SnipersHide and you will get a good discount making it an even better buy.

                    Or have one built in your caliber of choice. There are a LOT of custom rifle builders out there...some mentioned above.

                    .
                    Bring hay for my horse....wine for my men....and mud for my turtle!

                    What do you hear ???...... Nothing but the rain. Well grab your gun and bring in the cat.

                    "A fear of weapons is a sign of retarded sexual and emotional maturity."
                    - Sigmund Freud

                    Originally posted by ar15barrels
                    It makes it bigger and longer.

                    Comment

                    • #25
                      LynnJr
                      Calguns Addict
                      • Jan 2013
                      • 7959

                      There is nothing wrong with a 300 Win mag for long-range shooting.
                      At our 2000 yard matches they are often times the gun to beat. We even have a group of shooters who call themselves the 30 caliber conspiracy.
                      A factory Remington Sendero in 300 win mag is a good first rifle for long-range shooting. You can add a Atlas bipod to it and maybe swap out the factory trigger.
                      While your shooting out the barrel on the Sendero you can be picking up the parts to upgrade it.
                      The barrel is the most important part of accuracy. Once you shoot out the barrel you can chamber it up in any of the chamberings already mentioned.
                      Lynn Dragoman, Jr.
                      Southwest Regional Director
                      Unlimited Range Shooters Association (URSA)
                      www.unlimitedrange.org
                      Not a commercial business.
                      URSA - Competition starts at 2000 yards!

                      Comment

                      • #26
                        Hoop
                        Ready fo HILLARY!!
                        • Apr 2007
                        • 11547

                        A non magnum caliber is easier to live with IMHO.

                        That SAKO TRG would be an off the shelf solution.

                        OR have someone build a rifle like GAP.

                        Comment

                        • #27
                          ar15barrels
                          I need a LIFE!!
                          • Jan 2006
                          • 57199

                          Originally posted by 1911cat
                          Btw who is Randall??
                          That would be me.
                          I can help you spec out a rifle, and then build it for you on a scheduled walk-in appointment once you have all the parts in-hand.
                          Last edited by ar15barrels; 02-11-2017, 11:23 PM.
                          Randall Rausch

                          AR work: www.ar15barrels.com
                          Handguns: www.handgunbarrels.com
                          Bolt actions: www.700barrels.com
                          Foreign Semi Autos: www.akbarrels.com
                          Most work done while you wait on a scheduled shop visit.

                          Comment

                          • #28
                            CandG
                            Spent $299 for this text!
                            CGN Contributor - Lifetime
                            • Apr 2014
                            • 16970

                            Keep us posted on the build progress and first range report! Sounds like a fun project
                            Settle down, folks. The new "ghost gun" regulations probably don't do what you think they do.


                            Comment

                            • #29
                              1911cat
                              Member
                              • Jul 2016
                              • 355

                              I will thank you guys.

                              Comment

                              • #30
                                Ryridesmotox
                                Member
                                • Jan 2016
                                • 239

                                If it was me... And right now I'm looking at the same budgetary constraints... I'd get a 6.5 in a factory gun (for me, between a Bergara BMP and a Savage stealth) and an *** ton of ammo, and reloading components. Then by the time I burn out a barrel, maybe I've learned enough about precision rifle shooting to justify a 338 Lapua magnum built by a custom shop. And if not... Chamber it in something that is a happy medium and keep shooting until I perfect my craft of wind calls and elevation calculation in any environment. Having a gun that can shoot 1/4moa doesn't mean diddly Jack **** if you can't hit water from a boat.

                                Comment

                                Working...
                                UA-8071174-1