Unconfigured Ad Widget

Collapse

Savage Axis Build with MDT chassis

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • taktiks
    Member
    • Mar 2016
    • 144

    Savage Axis Build with MDT chassis

    Couldn't turn down a great deal on a Savage Axis II XP .308, so I figured it would be a good budget build for a decent range toy.

    Probably went to far for what this rifle really is...

    MDT LSS Chassis
    Luth-AR MBA-3 Stock
    MOE+ Grip
    UTG Recon 360 Bipod
    Glades Armory Bolt Handle

    Still has the Weaver Kaspa it came with, debating on optics at the moment. Also debating on putting in a 24" Varmint contour barrel.

    Some people will say I wasted money on a cheap rifle, but hey, I have fun with this stuff. At least it looks cool.





    Attached Files
  • #2
    TMB 1
    Calguns Addict
    • Dec 2012
    • 7153

    Cool!

    You went this far with it may as well get a new barrel.
    sigpic

    Comment

    • #3
      baih777
      CGN/CGSSA Contributor
      CGN Contributor
      • Jul 2011
      • 5680

      Originally posted by TMB 1
      Cool!

      You went this far with it may as well get a new barrel.

      I have to agree. Before you just buy a barrel, read up more on twist rates and buy a heavy barrel. ( Target ) Varmint barrels usually have slower twist rates.
      Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
      I really miss the good old Pomona Gun Shows.
      I'm Back.

      Comment

      • #4
        taktiks
        Member
        • Mar 2016
        • 144

        Originally posted by TMB 1
        Cool!

        You went this far with it may as well get a new barrel.
        It's hard to swallow that the barrel will be as much, if not more than the original rifle, especially after the chassis. But if I can get an E.R. Shaw barrel, I'll probably bite that bullet.

        It's between a 1:10 24" or a 1:12 26" barrel. I'd love to do a bull barrel or a heavier contour, but those would run well over $400 for this application, vice 200-250 for the aforementioned options.

        It's going to be an extremely rare opportunity for me to be able to shoot beyond 200yds, but not out of the question. I'd like to have a fair group at 5-600 yards, and getting out to 1k would be great considering the cost of this build, but not expected.

        Any thoughts on the length/twist?
        Last edited by taktiks; 08-24-2016, 2:00 PM.

        Comment

        • #5
          TMB 1
          Calguns Addict
          • Dec 2012
          • 7153

          If it were me I'd probably get a Criterion stainless varmint contour 26" with 1-10 or 1-11 twist.
          sigpic

          Comment

          • #6
            MongooseV8
            Veteran Member
            • Apr 2010
            • 4426

            I say because you have already jumped into to this project with both feet, get a decent bull barrel and a decent scope.

            Criterion and McGowen make good prefit barrels you can install yourself. Take this opportunity to upgrade to a 6.5 Creedmore. Get a solid base/rings and a fixed power SWFA scope for a winning combo.

            Comment

            • #7
              kengotit
              Senior Member
              • Jun 2012
              • 938

              As longs as you have fun in the process thats good in my book

              Looks like a Savage 10 stealth

              Stealth is supposed to be
              blue printed, threaded barrel and fluted barrel
              Shoot .5 moa at 100 out of the box,

              Chuck the mdt mag is useless
              Get magpul ai mag, $30 for 5 round mag
              Last edited by kengotit; 09-04-2016, 9:44 AM.
              Keep Calm and Carry On

              Check out the BAY AREA sub-forum
              http://www.calguns.net/calgunforum/f...play.php?f=304

              Comment

              Working...
              UA-8071174-1