Warner now taking pre-orders for Flatline .375 projectiles?

[ELR Researcher]

www.warner-tool.com is starting to take pre-orders for them.

150gr 7mm and 360gr 375 cal The official BC values are being double checked over this snowy weekend and should be posted sometime next week.
...
The 150gr 7mm needs a 9tw barrel and the 375 needs a 10tw.

With a 7mm WSM we shot the 150 to speeds in excess of 3400fps, G1 looks to be appx 0.65 based on the acustics.

The 375 runs 2850+ from a 338 LM Imp case necked up to 37cal. I dont know what it will run from a Cheytac but I suspect it will approach 3200fps without much trouble.

The G1 appears to be a shade in excess of 1.0!

*********************

As of 6 PM, Pacific, on 2/3/16 nothing on their website. Call 603-352-9521 (NH)

[Shakey]

Interesting. Has anyone independently checked any of the Flatline BCs? It seems like the bsnded solids always start out with big claims that get lowered.

[bug_eyedmonster]

I'd be curious too, I was planning to start buying some components for a .375!


Jerry

[ELR Researcher]

Dan Warner responded to my post (same info) on Snipershide:

*******************

As soon as we are ready to go to press with the ballistic coefficients, we will make an announcement and start the pre-order list. Processing the data from the acoustical test takes time. We want it to be as accurate as possible, so it is checked and re-checked. If you wish to get on the list now, you are welcome to do so; call or email us with your order. We will be limiting the initial quantities per order so as to get them out there to as many as possible. This is only temporary as we ramp up production and build inventory. Not set in stone yet, but it will most likely be 50 of the 7mm's and 25 of the 375's to begin with. Don't ask me about pricing yet; this will be posted as we make the announcements. We will also be updating the website with more detailed information on each bullet so you have some dimensional details to help you envision chamber and loaded lengths.

Call or email us if you have questions or want to get on the list:

603.352.9521

wtc@ne.rr.com or use the email link on our website

warner-tool.com

Thanks,

Dan