Unconfigured Ad Widget

Collapse

Savage 110 Left Hand BA problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • In My Cold Dead Hands
    Junior Member
    • Jan 2016
    • 67

    Savage 110 Left Hand BA problems

    zeroed my new out of the box .300 Win Mag with 3 different scopes achieving the same results:

    The firearm will zero with a laser bore sight at 50 yards with plenty of windage adjustment to the left and right with the intended scope of use (Nightforce NXS zerostop 8-32x56 purchased new as well) and it is consistantly shooting 6-7 inches left at 25 YARDS!!!! Other than sending it to Savage (3-6 week turnaround time) any suggestions? The windage dial on all scopes tested (Burris 3-9x40, Trijicon ACOG, Nightforce mentioned above) has to be maxed counter clockwise just to zero at 25 yards. I have no room to adjust longer shots if needed. Factory Ammo (Federal 155 gr) 40 rounds have been shot through it. How can ths gun bore sight evenly with a laser but shoot so far to the left? Any help is much appreciated. I'm thinking there is a barrel issue or muzzle brake issue. Thoughts, comments?

    -Extremely frustrated
  • #2
    Cody
    Senior Member
    • Jul 2009
    • 2148

    It's not the gun, its your scope mounting.

    Comment

    • #3
      In My Cold Dead Hands
      Junior Member
      • Jan 2016
      • 67

      remounted with 3 different scopes. all 3 mounted 3 different times for a total or 9 mounts... Same results

      Comment

      • #4
        Cody
        Senior Member
        • Jul 2009
        • 2148

        Originally posted by In My Cold Dead Hands
        remounted with 3 different scopes. all 3 mounted 3 different times for a total or 9 mounts... Same results
        All on the same rail?

        Comment

        • #5
          In My Cold Dead Hands
          Junior Member
          • Jan 2016
          • 67

          yes

          Comment

          • #6
            Cody
            Senior Member
            • Jul 2009
            • 2148

            Then I believe your base/rail is the issue. Maybe even the base mounting holes in the gun but there is no way a barrel should be off 7 inches at 25 yards. When you bore sight (look down the barrel with the bolt removed) does it line up with the scope?

            Comment

            Working...
            UA-8071174-1