Unconfigured Ad Widget

Collapse

Anschutz mark10 ,

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gonz
    Junior Member
    • Jun 2012
    • 12

    Anschutz mark10 ,

    Is it not sitting right in stock


    Sent from my iPhone using Tapatalk
  • #2
    Gonz
    Junior Member
    • Jun 2012
    • 12

    This is family gun remember shooting it when I was young I just don't remember the barrel being off to the right in the stock now that I've inherited this and I'm older haven't seen it for a while it looks a little bit off


    Sent from my iPhone using Tapatalk

    Comment

    • #3
      Gonz
      Junior Member
      • Jun 2012
      • 12

      Is it warped


      Sent from my iPhone using Tapatalk

      Comment

      • #4
        JMP
        Internet Warrior
        CGN Contributor - Lifetime
        • Feb 2012
        • 17056

        From the picture, it looks like the stock is thicker on the left side than the right; is that the case?

        With an Anscutz, they generally are just barrelled actions that sit in a wood stock with a couple of light action screws. Take off the barrel (do not force the screws if they are stuck from years of sitting). Then, reinstall the barrel and keep it on straight. As long as your barrel is free floating, it should be okay.

        It's not really apparent from the picture what's going on. When you remove the barrelled action, you will be able to get a better look at the stock. Also, you should be able to get a new Anschutz stock for the rifle. It's one of the few guns you will buy new and the stock will not be attached to the receiver.

        Comment

        • #5
          slamfire1
          Banned
          • Aug 2015
          • 794

          With an Anscutz, they generally are just barrelled actions that sit in a wood stock with a couple of light action screws. Take off the barrel (do not force the screws if they are stuck from years of sitting). Then, reinstall the barrel and keep it on straight. As long as your barrel is free floating, it should be okay.
          Agree. As long as the barrel is not touching wood, there is nothing wrong.


          It's not really apparent from the picture what's going on.
          Amen.

          Also, you should be able to get a new Anschutz stock for the rifle. It's one of the few guns you will buy new and the stock will not be attached to the receiver.
          In the unlike situtation there is a stock problem, I have found that replacement Anschutz stocks are expensive. I did look at pictures of your model, I think it would be easier and cheaper to fix an alignment issue by glass bedding the action.

          Comment

          Working...
          UA-8071174-1