CZ Custom Work - Handling and/or Range Session?

[nearsightednate]

Hi,
I'm going to have my CZs worked on but am torn as to which way to go. I believe that until I handle, if not shoot a through rounds through them, will I be able to answer that question. So, anyone willing to let me try out their CZs that have had work done on them by CZ Custom, CGW, and/or Automatic Accuracy? PM me with details and let's see if we can work something out.

Thanks in advance!

[himurax13]

Well if you are willing to drive east, I have some home brewed stuff and some bone stock stuff ATM ...

[ohhgourami]

If you're willing to drive to the far end of the San Gabriel valley, I'd definitely let you try my SP-01 with a combination of CZC and CGW parts done by me.

[nearsightednate]

Himurax13, how far east?

Ohhgourami, that may be a stretch but when would you be available?

[forerl]

If you're in the Bay Area, specifically at United Sportsmen in Concord then you can try mine. Mine was worked by CGW, DA is 4.75lb with 8.5lb hammer spring and a little under 3lbs for SA

[himurax13]

Himurax13, how far east?

Ohhgourami, that may be a stretch but when would you be available?

Well simi valley is halfway between us. I must warn you though, my homebrew stuff is probably a bit more agressive than what the Custom shops will do.

[akjunkie]

I'll keep U in mind next time I hit Angeles Shooting Range.

My SP-01 was tricked out by CZCustoms.

I did a post on my SP-01 several years back. U can track it down.

[Scrap]

If you're ever in San Diego I have a SP-01 bone stock and a SP-01 Shadow Target you can try.

[davidwow]

I have two guns from CZ custom you can try out if you are ever in the Orange County area. They are great guns. I plan to get a CGW mod next since David at CGW gives unparalleled customer service and I believe he will do a top notch job (spoke with him several times for advice on my CZ's and he was always nice and informative).