Unconfigured Ad Widget

Collapse

Barrel fitting question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • madoka
    Senior Member
    • Dec 2012
    • 2039

    Barrel fitting question

    Before I shoot some guns with swapped barrels, I just want to double check.

    I swapped some barrels out on a few guns (e.g. bought a non-threaded barrel, bought an aftermarket barrel, bought a replacement barrel, etc.).

    As long as the gun goes into battery, the barrel does not need any fitting and I am good to go, correct?
  • #2
    Oceanbob
    I need a LIFE!!
    • Jun 2010
    • 12721

    Originally posted by madoka
    Before I shoot some guns with swapped barrels, I just want to double check.

    I swapped some barrels out on a few guns (e.g. bought a non-threaded barrel, bought an aftermarket barrel, bought a replacement barrel, etc.).

    As long as the gun goes into battery, the barrel does not need any fitting and I am good to go, correct?
    Should be good to go. Have fun!
    May the Bridges I burn light the way.

    Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.

    Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728).

    Comment

    • #3
      walmart_ar15
      Senior Member
      • Oct 2006
      • 2345

      strictly speaking you should check each new bbl with a head space gauge. But 99% you are GTG as long as the bbl was specifically for the model of the pistol.

      Comment

      • #4
        bwhited
        Senior Member
        • Jun 2009
        • 1947

        Often the polymer firearms will work just switching out barrels but 1911's need to be fit to operate correctly.
        The original message should have specified the model of firearms you are talking about.

        Comment

        • #5
          Carcassonne
          Veteran Member
          • Jul 2012
          • 4897

          Originally posted by madoka
          Before I shoot some guns with swapped barrels, I just want to double check.

          I swapped some barrels out on a few guns (e.g. bought a non-threaded barrel, bought an aftermarket barrel, bought a replacement barrel, etc.).

          As long as the gun goes into battery, the barrel does not need any fitting and I am good to go, correct?

          Some high quality guns like SIG Sauer and CZ have fitted barrels, so swamping one barrel into another slide may not always work. Other production guns like Glock, M&P, and Beretta have 100% interchangeable parts. One of the stipulations for a US military pistol was that all parts had to be interchangeable from one gun to another with no fitting involved, so the Beretta 92/M9, and any US Mil-Spec 1911 should be OK to swap parts.

          Revolver barrels and cylinders may require fitting.


          .
          Be sure to ask your doctor if depression, rectal bleeding, and suicide are right for you.

          In the United States a person's expertise on a subject is inversely proportional to their knowledge of the subject: The less they know about something, the more they become an expert on it.

          I am being held hostage in a giant insane asylum called Earth.

          Comment

          • #6
            madoka
            Senior Member
            • Dec 2012
            • 2039

            Okay, so I own S&W replacement barrels for a S&W M&P 9 and a 40. Was thinking about TiN coating them to compare wear against the original barrels. Furthermore, I was planning on buying various KKM, Bar-Sto, Stormlake, etc. barrels for assorted Glocks and Beretta 92s for testing purposes.

            The troubling ones are probably these:

            - Sig X-Six - bought a second barrel for it to send off for TiN treatment
            - Sig X-Five - was planning on buying a Bar-Sto barrel
            - HK Mark 23 - bought a second barrel because of the threaded barrel; thinking of TiN coating as well since I don't like the exposed metal.

            In every case, the guns go into battery and the slide seems to move around as it should. Is there any other way of knowing whether they fit okay?

            Comment

            • #7
              P5Ret
              Calguns Addict
              • Oct 2010
              • 6406

              Originally posted by madoka
              Okay, so I own S&W replacement barrels for a S&W M&P 9 and a 40. Was thinking about TiN coating them to compare wear against the original barrels. Furthermore, I was planning on buying various KKM, Bar-Sto, Stormlake, etc. barrels for assorted Glocks and Beretta 92s for testing purposes.

              The troubling ones are probably these:

              - Sig X-Six - bought a second barrel for it to send off for TiN treatment
              - Sig X-Five - was planning on buying a Bar-Sto barrel
              - HK Mark 23 - bought a second barrel because of the threaded barrel; thinking of TiN coating as well since I don't like the exposed metal.

              In every case, the guns go into battery and the slide seems to move around as it should. Is there any other way of knowing whether they fit okay?
              You should be fine on the Sig's. Parts are interchangeable. The final exam of Sig's factory armorers course is gather all the part you need to assemble a complete pistol out of a bin. All of the parts were in one bin also. The finished assembly has to function check properly in order to pass the class.

              If I remember correctly the Sig actually beat the Beretta in the M9 competition, but the price point went to Beretta, and Sig got the M10 contract a few years later, as a consolation prize.

              Can't say for certain on the H&K, but my bet it is ok. USP's are fully interchangeable within the same size frame. The 45 frame is just slightly larger.

              Comment

              • #8
                96chevjumps
                Senior Member
                • Apr 2011
                • 530

                Drop the longest over all length round you have into the barrel OUT OF THE WEAPON you should see zero rim of the case hanging out past the rear lug that touches the breach face. Safe to fire if all procedures are met.

                Comment

                Working...
                UA-8071174-1