Glock 21 measurements

[jingerale]

Hi Glock 21 owners.

Need a favor. I own a CZ P-09 and is currently looking for a holster.
I was told by a member here that the P-09 will fit a Glock 21 holster.

I did confirm that both slides are just around 1.125".
But I would also like to confirm the distance from the top of the slide to the bottom of the rail. And if you happen to have a Streamlight TLR 1, it would be great if you can also measure the distance from the front of the lens to the tip of the slide when installed.
Maybe also the distance from the front of the slide to the trigger guard.

I'm looking to order a OTGHex OWB with tac light and RTI compatible, I figure the above information is probably a good thing to have before dropping that kind of cash.

Thanks!!!

[heidad01]

Measurements alone do not guarantee a perfect fit. Take your P01 to your local gun shop and try the fit in the g21 holster.

[jingerale]

Anyone?

I've look for a solid model at the usual Cad places, no luck.

[Bill Steele]

On my G21SF, here are a few dimensions that might allow you to bracket it enough to fire for effect:

Top of slide to bottom of the rail, closest to the trigger guard where rail ends: 1.510"

Top of slide to bottom of rail where bevel ends up front and rail start going straight back: 1.440"

Front of dust cover to front of trigger guard, where trigger guard meets frame: 2.735"

Slide width: 1.118"

Frame width just above front of trigger guard: 1.170"

I hope some of that gives you a lead.

Good luck.

PS - Most places have reasonable return policies, so if it doesn't work out, just return it and keep looking.

[jingerale]

On my G21SF, here are a few dimensions that might allow you to bracket it enough to fire for effect:

Top of slide to bottom of the rail, closest to the trigger guard where rail ends: 1.510"

Top of slide to bottom of rail where bevel ends up front and rail start going straight back: 1.440"

Front of dust cover to front of trigger guard, where trigger guard meets frame: 2.735"

Slide width: 1.118"

Frame width just above front of trigger guard: 1.170"

I hope some of that gives you a lead.

Good luck.

PS - Most places have reasonable return policies, so if it doesn't work out, just return it and keep looking.

Thank you so much!

Doesn't look like it will work.

Thanks again.