Unconfigured Ad Widget

Collapse

P938 trigger

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • doh31672
    Member
    • Oct 2010
    • 471

    P938 trigger

    Just picked up my P938 Equinox, and of course one of the things I was aware of before buying were the comments about the trigger being gritty and heavy. I've heard that it smooths out a bit with shooting, but I've also read that you can replace the mainspring and bend the sear springs to lighten the trigger, similar to a 1911. I'll probably try polishing the trigger bow, but any other suggestions from you P938 owners on how to smooth it out?
  • #2
    Picturepro
    Senior Member
    • Feb 2014
    • 518

    maybe this....

    Decreased Rate Hammer SpringA nice inexpensive and dramatic upgrade for the 938/238 pistols. This hammer spring is made to our specs and will drop the trigger pull to about 5-5.5 lbs and will still be reliable with standard quality ammo, steel cased ammo not recommended. ***We recommend an experienced gunsmith install this spring***Our spring kits are made to last from actual High Quality Chrome Silicon and not inferior Music Wire like other kits on the market.Factory hammer spring weight is 16lbs, ours is reduced to 12lbs.Fits Sig P238 and P938 PistolsAs always, proudly made right here in the USA.


    more trigger talk...
    Hey Guys! I have bothe the 238 and 938 and have purchased the stainless triggers for each. I am ready to install them and have watched the video multiple times from partsproduction. I have a couple questions for those of you that have done this... 1. I am planning on cleaning and...
    Last edited by Picturepro; 10-08-2014, 4:42 PM.

    Comment

    • #3
      1CavScout
      Veteran Member
      • Feb 2013
      • 3234

      Shoot some rounds through it. I don't think the trigger was ever bad on my P938 for a carry gun, but it did seem to smooth out some after a few hundred rounds.
      sigpic

      Comment

      • #4
        AGFNTB
        Senior Member
        • Jan 2014
        • 804

        Be careful with the sear spring/MSH. The MSH is plastic and the detent button is prone to wearing/breaking. if you take the grips off you can see the detent on the MSH from the inside of the magwell.

        Comment

        • #5
          dyson
          Veteran Member
          • Feb 2013
          • 4342

          No issues with the trigger here

          Comment

          • #6
            static808
            Senior Member
            • Aug 2011
            • 893

            i'd be careful messing with the trigger or a brand new gun that you may be carrying or using in SD. as some have stated, my trigger lightened up noticeably after 250 rounds. both are at 5-6lbs now, and quite crisp, perfect for its intended use. im not shooting competitions with this thing...

            Comment

            Working...
            UA-8071174-1