Cheap CZ 10 round mags

[railroader]

The mags are factory witness mags. They are all steel and look exactly like factory witness 16 rounders but they have 2 dimples so the follower can only go down far enough to hold 10 rounds. The mags have about a 1/16" gap between the baseplate and the bottom of the gun frame. Grabagun is selling them for $22 plus about $4 for shipping for one mag. I got one today and these are nice mags. Looks like there are 2 left. http://grabagun.com/mag-eaa-wit-9mm-...tl-n-poly.html
They don't look like the pic on the website.

[mrwilson1984]

Will these magazines work in a CZ SP-01 9 MM?

Please confirm. Thanks. I'm a newbie...

[railroader]

Yes. I just had it in my sp-01 shadow. It hand fed fine and locks back the slide.

[mrwilson1984]

Tanks roader...

I picked up the last two...see how they work...

[elSquid]

Just as a general caution, care should be taken when ordering Witness 9mm magazines...there are two different types, and they are different sizes.

615964 - are the "new" generation 9mm 10 round magazines

101920 - are the "old" generation 9mm 10 round magazines

I ran into this nonsense while trying to buy mags for my Witness Elite. IIRC, the old generation 101920s work with CZs, but the new ones don't. My Elite needed the new generation ones.

-- Michael

[railroader]

Midway has them too for a couple of bucks more shipped. http://www.midwayusa.com/product/557...und-steel-blue

[jstotts]

Mec-Gar is the OEM for mags for CZ. Here's some legit mags for $20: http://www.gregcotellc.com/cart/inde...061fd762215b07

(These are full-size, so 75 or SP-01, but not P-01 or compact)

[Euphoria526]

Mec-Gar is the OEM for mags for CZ. Here's some legit mags for $20: http://www.gregcotellc.com/cart/inde...061fd762215b07

(These are full-size, so 75 or SP-01, but not P-01 or compact)

Except that you CAN use regular 75 mags in a p01, they just won't be flush and stick out a bit. I kinda like the look sometimes

[railroader]

Mec-Gar is the OEM for mags for CZ. Here's some legit mags for $20: http://www.gregcotellc.com/cart/inde...061fd762215b07

(These are full-size, so 75 or SP-01, but not P-01 or compact)

That's a great deal. I'm glad to see Mec-gar is making 10 rounders again. Mark

[glock17_1986]

Thats a good price. I couldnt fimd them for under 30 to 40

[sigstroker]

My CZ mags don't look anything like Mac-Gars.

[railroader]

My CZ mags don't look anything like Mac-Gars.

Those mec-gar 10 round mags look to be their hi caps that are dimpled to stop the follower from going all the way down. That is how the witness mag I got was made. It's probably cheaper to make 10 rounders this way than make a completely different mag.

[SDawson]

Just bought mag's for my SP-01 and 97b from Greg. Best price and great to work with.

[rickterscale]

Also just bought a couple mags for the SP-01. Great price at $20 each, and reasonable shipping charge. The price on the mec-gar website for 10-rounders is $30.

[rickterscale]

Also just bought a couple mags for the SP-01. Great price at $20 each, and reasonable shipping charge. The price on the mec-gar website for 10-rounders is $30.

And 3 minutes later I have a tracking number. They move pretty quick over there.