Unconfigured Ad Widget

Collapse

Need sight adjustment help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • slowjonn
    Senior Member
    • Oct 2005
    • 965

    Need sight adjustment help

    I have a Springfield TRP that is off a bit. I need to drift the rear sight to the left a bit. I don't have access to a sight puller. Whats my best bet? Thanks
  • #2
    James R.
    Senior Member
    • Apr 2006
    • 774

    Originally posted by slowjonn
    I have a Springfield TRP that is off a bit. I need to drift the rear sight to the left a bit. I don't have access to a sight puller. Whats my best bet? Thanks
    You can drift them with a brass or delrin punch. Mind you I wouldn't do this with luminous sights, however if you had the TRP with luminous sights these adjustments would be done with a screwdriver :-)

    Nice pistol...

    Regards,

    James R.

    Comment

    • #3
      slowjonn
      Senior Member
      • Oct 2005
      • 965

      Not sure I understand what you mean. I have Novak nightsites on it....I tried the brass punch and ahmmer meathod. No luck...that rear sight is in tight!

      Comment

      • #4
        James R.
        Senior Member
        • Apr 2006
        • 774

        Originally posted by slowjonn
        Not sure I understand what you mean. I have Novak nightsites on it....I tried the brass punch and ahmmer meathod. No luck...that rear sight is in tight!
        I don't think trying to drift any night sights is a good idea. Those are tiny glass ampules filled with Tritium (radioactive gas) if the vial breaks and the gas escapes it's a.) not great for you to inhale and b.) it ruins your expensive sights.

        I have the Trijicon sights in my USP40 and I just ponied up for the sight pusher, it's not cheap...but at least you know you're using the right tool for the job.

        The normal run of the mill TRP comes with non luminous combat sights IIRC, the model they show with luminous sights on the Springfield site is an adjustable type anyhow, so if you had those we wouldn't be having this discussion :-P

        FWIW - Yeah they can be in there DAMN tight. Pushing out my stock HK sights wasn't so bad, but trying to get the Trijicons in was a royal PITA. I had to do a fair bit of wet sanding of the sight base (on the Trijicons, not the slide) to even get them to consider going in.

        That's a real nice gun, I think maybe you should just bounce into a good gunsmith who can adjust them for you and fire it in a ransom rest or something to eliminate all the variables.

        Regards,

        James R.

        Comment

        Working...
        UA-8071174-1