Glock malfunction need help

[TMONEY]

I bought a brand new glock 19 and took it to the range. At about the 39 ninth round the mag comes out and it stove pipes. I went thru another 10 rounds and it was fine. I took the gun home and put 4 rounds each in 4 different mags. I rack the gun 3 times and on the 4th time the slide locks back with 1 round left and looks to misdeed. This happen on all 4 mags.

Any help would be appreciated thanks in advance

[waawaaweenie]

did you try different brands of ammo?

and racking it is going to be different than actually firing it

[5ZS]

Is the stamp on your follower 2183 or 9mmX?
2183 may be the problem, if not (already have the 9mmX follower) continue to troubleshoot...

[Virus55]

Im gunna say its the follower on the mag

[TMONEY]

did you try different brands of ammo?

I did try different brands of ammo

and racking it is going to be different than actually firing it

True but it's not supposed to slide lock with one round left.

[TMONEY]

Is the stamp on your follower 2183 or 9mmX?
2183 may be the problem, if not (already have the 9mmX follower) continue to troubleshoot...

I'll check it when I get home tonight.

[evolixsurf]

first off, instead of loading and racking mags at home, take them to the range and try them hot. Its best to break these in for a few hundred(idk, 200-500 rds) before considering them worthy of being fielded.

Then report back...

If there is an issue there, then we can tackle it then. I doubt there will be.

[tbc]

Shoot hotter ammo to breaking in the stiff recoil spring and it is good to go.

[NewbieDave]

Hmmmm.... you had a serious malfunction if it blew out your mag n stove-pipe the case. Have broke it down and check all the parts?

dpc

[jeffrice6]

Hmmmm.... you had a serious malfunction if it blew out your mag n stove-pipe the case.

This