Unconfigured Ad Widget

Collapse

xd 45 trigger info?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • spencer13
    Member
    • Aug 2013
    • 204

    xd 45 trigger info?

    I'm looking to get a trigger kit or trigger work done on my xd 45. I was wondering if anyone knew any good gun smiths in the Los Angeles area. Or if there are any kits that aren't too much trouble.

    Thanks
  • #2
    voodoomedman
    Senior Member
    • Nov 2008
    • 781

    In my opinion just send it to Springfield. Prices are reasonable, they have a full custom shop and know the guns the best and you keep your lifetime warranty on the gun and upgrade. Now if you really want to check out somewhere else then Powder River is supposed to be a good kit.


    Sent from my iPhone using Tapatalk

    Comment

    • #3
      5ZS
      Senior Member
      • Mar 2014
      • 1047

      I have a the PRP drop in kit, eliminates the pre/post travel greatly.
      I did a self install, everything was drop in. I think the installation was pretty easy. The only thing I did not install was the new firing pin spring.

      Go for it, not much else you can do to change the amount of trigger movement.

      Comment

      • #4
        jben
        CGN/CGSSA Contributor
        CGN Contributor
        • Oct 2008
        • 2061

        You don't need a gunsmith for an excellent trigger on an XD.

        Comment

        • #5
          haw1144
          Member
          • Nov 2012
          • 299

          I also have the PRP drop in... great improvement and easy to install (following their youtube video).

          Comment

          • #6
            10rounds
            CGSSA Associate
            • Jun 2007
            • 421

            I sent my XD45 to Springfield. I now enjoy shooting it. Got rid of the excessive long trigger travel which was my biggest complaint with the XD45.
            NRA Life, GOA Life, SAF Life, CRPA

            Comment

            • #7
              spencer13
              Member
              • Aug 2013
              • 204

              How long was the turnaround time from Springfield

              Comment

              • #8
                10rounds
                CGSSA Associate
                • Jun 2007
                • 421

                Originally posted by spencer13
                How long was the turnaround time from Springfield
                I think it was about 2 weeks which isn't bad I guess.
                NRA Life, GOA Life, SAF Life, CRPA

                Comment

                • #9
                  maxit
                  Member
                  • Feb 2009
                  • 298

                  XD expert gunsmith

                  hi Spencer, try Dave's Metal Works in Covina
                  call after 1PM.
                  he did a great job on my XD9
                  and specializes in these as well as other makes.

                  Comment

                  • #10
                    Brandon04GT
                    In Memoriam
                    • Feb 2011
                    • 3016

                    Originally posted by jben
                    You don't need a gunsmith for an excellent trigger on an XD.

                    http://www.pistolgear.com/proddetail.php?prod=05SSE
                    Does anyone have experience with this kit? Springer doesn't seem to list it on their website and it appears to be some sort of budget version of their full $130 kit.

                    Comment

                    • #11
                      railroader
                      Veteran Member
                      • Oct 2005
                      • 3115

                      Originally posted by Brandon04GT
                      Does anyone have experience with this kit? Springer doesn't seem to list it on their website and it appears to be some sort of budget version of their full $130 kit.
                      From the reviews at pistol gear it doesn't look like this kit eliminates the pre travel. I think you need the springer trigger bar for that. I have a PRP kit my XD9 and it reduces the pre and overtravel along with the trigger being much lighter.

                      Comment

                      • #12
                        Davinho
                        Member
                        • Apr 2006
                        • 166

                        Originally posted by railroader
                        From the reviews at pistol gear it doesn't look like this kit eliminates the pre travel. I think you need the springer trigger bar for that. I have a PRP kit my XD9 and it reduces the pre and overtravel along with the trigger being much lighter.
                        Correct. I've got the full kit in both of my XD .45s (Tactical and Compact). The trigger bar is what controls the take-up and overtravel. If I had to do it again, I'd be tempted to try ONLY replacing the trigger bar and just polishing the stock sear. Thumbs up on the Springer kit.
                        High speed, low drag? Only when stalking donuts.

                        Comment

                        • #13
                          Brandon04GT
                          In Memoriam
                          • Feb 2011
                          • 3016

                          Originally posted by Davinho
                          Correct. I've got the full kit in both of my XD .45s (Tactical and Compact). The trigger bar is what controls the take-up and overtravel. If I had to do it again, I'd be tempted to try ONLY replacing the trigger bar and just polishing the stock sear. Thumbs up on the Springer kit.
                          After examining the components with the slide off my XD9, it seems like it would be pretty easy to remove pre-travel and over-travel if more material was present on the two parts of the trigger bar that act as a "stop" against the frame.

                          Springer and PistolGear note that the Springer trigger bar works only with the Springer sear and not the stock one yet I've read reviews about people using the Springer bar in conjunction with a PRP trigger kit.

                          My XD9 is basically completely stock sans for a PRP lightweight sear spring which has taken a good pound or so off the trigger pull. It has made a pretty big difference at the range especially for only a few dollars.

                          Might be a wild idea, but if you can get ahold of a stock trigger bar, weld some extra material on the two areas and then file it down to adjustment then I think a functional home trigger job can be had. Obviously for serious HD duty it will probably be a better idea to fork out the cash for a full trigger kit but I don't see anything wrong with this idea for fun range use. Obviously the sear, striker and safety components are not touched so I don't think there would be any real safety issues.

                          Comment

                          • #14
                            Davinho
                            Member
                            • Apr 2006
                            • 166

                            Originally posted by Brandon04GT
                            After examining the components with the slide off my XD9, it seems like it would be pretty easy to remove pre-travel and over-travel if more material was present on the two parts of the trigger bar that act as a "stop" against the frame.

                            Exactly right. The Springer bar has an oversized flange on the forward side of the magazine-well bend that controls overtravel, and the disconnector bump has a rearward extension that contacts the back of the magazine well to determine the take-up/sear engagement. File both down to get the characteristics you want.

                            As for compatibility with the stock sear, I'm pretty sure it worked for me, but it was a while ago and I may be misremembering. In my experience both Springer Precison and Powder River are class acts.
                            High speed, low drag? Only when stalking donuts.

                            Comment

                            • #15
                              Davinho
                              Member
                              • Apr 2006
                              • 166

                              Word of advice if you DIY: Don't reduce the sear engagement. I bought my .45 compact used, and the previous owner had the Springfield Custom Shop work on the trigger. They reduced the sear engagement by essentially removing all the take up, and a bit more. This resulted in a nice short and crisp trigger, but after a few hundred rounds it would occasionally fail to cock the striker, sometimes it did automatic double taps, and finally it discharged when I dropped the slide. That's when I replaced everything with the full Springer Precision kit and it's been running like a top ever since.
                              High speed, low drag? Only when stalking donuts.

                              Comment

                              Working...
                              UA-8071174-1