Unconfigured Ad Widget

Collapse

Single Action Exemption still valid?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CEDaytonaRydr
    Veteran Member
    • Feb 2010
    • 4142

    Single Action Exemption still valid?

    Hey guys. I was looking at a Chiappa 1873-22 in a local FFL but the one they had was the 6 shot, and I wanted the 10 shot with the extra cylinder. They were busy, so I left and figured I'd come back later since the place is right next to where I work. When I came back, they told me that they had to return the pistol to the distributor, and couldn't order the 10 shot model due to it not being on the safe handgun list.

    I'm no expert on this subject, but unless something has changed since last year, weren't single action revolvers exempt from the list?

    If so, could someone site the law so that I can inform them?

    Thanks for your help..
    Last edited by CEDaytonaRydr; 04-25-2014, 1:48 AM.
  • #2
    ke6guj
    Moderator
    CGN Contributor - Lifetime
    • Nov 2003
    • 23725

    32100. (a) Article 4 (commencing with Section 31900) and Article 5
    (commencing with Section 32000) shall not apply to a single-action
    revolver that has at least a five-cartridge capacity with a barrel
    length of not less than three inches, and meets any of the following
    specifications:
    (1) Was originally manufactured prior to 1900 and is a curio or
    relic, as defined in Section 478.11 of Title 27 of the Code of
    Federal Regulations.
    (2) Has an overall length measured parallel to the barrel of at
    least seven and one-half inches when the handle, frame or receiver,
    and barrel are assembled.
    (3) Has an overall length measured parallel to the barrel of at
    least seven and one-half inches when the handle, frame or receiver,
    and barrel are assembled and that is currently approved for
    importation into the United States pursuant to the provisions of
    paragraph (3) of subsection (d) of Section 925 of Title 18 of the
    United States Code.
    Jack



    Do you want an AOW or C&R SBS/SBR in CA?

    No posts of mine are to be construed as legal advice, which can only be given by a lawyer.

    Comment

    • #3
      CEDaytonaRydr
      Veteran Member
      • Feb 2010
      • 4142

      Originally posted by ke6guj
      32100. (a) Article 4 (commencing with Section 31900) and Article 5
      (commencing with Section 32000) shall not apply to a single-action
      revolver that has at least a five-cartridge capacity with a barrel
      length of not less than three inches, and meets any of the following
      specifications:
      (1) Was originally manufactured prior to 1900 and is a curio or
      relic, as defined in Section 478.11 of Title 27 of the Code of
      Federal Regulations.
      (2) Has an overall length measured parallel to the barrel of at
      least seven and one-half inches when the handle, frame or receiver,
      and barrel are assembled.
      (3) Has an overall length measured parallel to the barrel of at
      least seven and one-half inches when the handle, frame or receiver,
      and barrel are assembled and that is currently approved for
      importation into the United States pursuant to the provisions of
      paragraph (3) of subsection (d) of Section 925 of Title 18 of the
      United States Code.
      Awesome! Thanks man!!!

      What's even worse about the story is that they said the DOJ told them they couldn't sell it because it wasn't on the list. Could be third party info, and untrue but if it is what happened, that's disconcerting...

      Comment

      Working...
      UA-8071174-1