Tweet
Any info on it? I think it was a -6. Ser#awf6xxx. So much for sleeping in the next ten days! No lock and the firing pin is on the hammer.
-
-
Hold on tight! I hope you got a deal or plan on holding on to it for awhile. Enjoy it.USS ZELLARS
DD-777 -
I have a 3 inch. It's a real boomer. If you get the hogues for the x frame they fit the same as the n franes ones but are a bit thicker around the back. Strongly reccomend.Last edited by ElToro; 02-16-2014, 8:50 PM.Comment
-
You should have a lot of fun shooting that.
My 3 inch .44 mag is an Astra and it's a great shooter but I'd like to replace it with a Smith. My 629 is a 6 1/2"People don't like to be meddled with. We tell them what to do, what to think, don't run, don't walk. We're in their homes and in their heads and we haven't the right. We're meddlesome.
--River TamComment
-
-5's should have been the last one without a lock. Are you sure its not a -4 or older. Either way, you are going to have a big blast with that on. I know a .44mag in 4" is a real blast, like volley ball sized with a full charge of H110.www.culinagrips.com
"custom grips for shooters by shooters"Comment
-
The 629-4 is the last one with the hammer mounted firing pin if I'm not mistaken. I have a 3" 629-4 and its one of my favorite handguns for all around use."You keep using that word. I do not think it means what you think it means."
"What we get away with isn't usually the same as what's good for us"
"An extended slide stop is the second most useless part you can put on a 1911"
"While Ruger DA revolvers may be built like a tank, they have the aesthetics of one also,
although I suppose there are a few tanks which I owe an apology to for that remark"Comment
-
I might be off on the -#, I was taking the gun cert testComment
-
"You keep using that word. I do not think it means what you think it means."
"What we get away with isn't usually the same as what's good for us"
"An extended slide stop is the second most useless part you can put on a 1911"
"While Ruger DA revolvers may be built like a tank, they have the aesthetics of one also,
although I suppose there are a few tanks which I owe an apology to for that remark"Comment
-
I can't add any info... I just want to say congrats! And I look forward to pics and a range report when available.
I will be doing the paperwork on a Model 29-2 in 8-3/8" in a few days (had to wait for the gun to clear the 30-day check on consignment guns) and I am excited. I already have some .44 mag ammo waiting for it
That means you will have yours before I get to pick mine up.
Congrats again and enjoy it.One Way to Post Pics ********** How to Submit an iTrader Rating That Counts ********** Brass for Sale
AR's for Sale ********** Ammo for Sale ********** Accessories/Parts for Sale ********** Handguns for SaleComment
-
My buddy has something Smith called 'The Trailboss'
A 629 with 3" ported barrel. A handful to say the least.Comment
-
Stainless?Active Law Enforcement
Certified Glock Armorer
Hunter & Fisherman
God Bless The USA
Lets Go Brandon!!!Comment
-
Stainless
Quite accurate when in the hands of an experienced shooter. I developed a wicked flinch after a cylinder full.Comment
-
You could always shoot .44 special in that revolver.
Last edited by sakosf; 02-17-2014, 11:49 AM.Comment
-
Ok I looked at it again and its a 629-1, now I'm excited even more!Comment
-
Active Law Enforcement
Certified Glock Armorer
Hunter & Fisherman
God Bless The USA
Lets Go Brandon!!!Comment
Those -#'s aren't the easiest things to read either. Congrats on your new revolver, hope you enjoy it!
There are currently 29690 users online. 118 members and 29572 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment