Unconfigured Ad Widget

Collapse

Range Report -- new Eclipse Target II

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rogervzv
    Senior Member
    • Feb 2011
    • 2087

    Range Report -- new Eclipse Target II

    I finally got the new Kimber Eclipse Target II .45 to the ranged! Before taking it to the range I naturally cleaned and lubed the gun thoroughly, using Hoppes gun oil for lubricant along the slide.

    The gun did very well. I shot about 250 rounds through it. Here are the high points.

    1. I did have a couple of FTF incidents. I am not sure why. It happened three times using quality CMC power mags. For now I am assuming that this was due to the gun being new in the 500 round "break in" stage. I was using pretty good Range and Herter's ammo. For now I am attributing this to break-in. 3 FTFs in 250 rounds is not worrisome.

    2. This gun is freaking accurate. I got the best groups at ten yards than I have ever gotten with a .45. I don't know if If was just having a good day or what, but I outshot my Colt Gold Cup with this gun.

    3. The trigger on this pistol is superb. That is all I can say.

    Except for the de minimus FTF issues, which I will keep an eye on, there is nothing about this gun that I do not like. What a fun shooter!
    Come and Take It!
    I'm the only hell my momma ever raised ...
  • #2
    nahpungnome
    Senior Member
    • Oct 2013
    • 2159

    Those Eclipses are very nice looking guns. I had some FTF issues with my Sig within my 500 rounds, well 498. 1 WWB round wouldn't even chamber because it was out of spec and my wife lost one over the firing line while racking a FTF.

    It seems pretty normal to have some issues while 1911s break in. I'll never buy WWB from Walmart again though, it's REALLY dirty and cleaning up afterwards was a chore compared to the Magtechs I used.

    Comment

    • #3
      Frozenguy
      CGN/CGSSA Contributor
      CGN Contributor
      • Jan 2008
      • 6311

      PICTURES!!!

      Comment

      • #4
        The Gleam
        I need a LIFE!!
        • Feb 2011
        • 13913

        No offense, but only Ethiopians, Rwandans, and the Homeless suffer FTF.

        I get the break-in stage, believe me; but if there is a FTF on a new firearm, high-end 1911 or not (even on a Baer or Ed Brown) look for factors causing it.

        People always accept or take this as "the norm" for 1911s, and I differ greatly on that, as I have had plenty of 1911s perform right out of the box without FTF - and if they did, I sought out the problem without any haste, to discover the cause (often, it's the mag not seating properly, or feed-lips out of whack). For other people, it has often been lack of proper lube.

        Sounds like you got a winner, just need to work out the bugs.
        -----------------------------------------------
        Originally posted by Librarian
        What compelling interest has any level of government in knowing what guns are owned by civilians? (Those owned by government should be inventoried and tracked, for exactly the same reasons computers and desks and chairs are tracked: responsible care of public property.)

        If some level of government had that information, what would they do with it? How would having that info benefit public safety? How would it benefit law enforcement?

        Comment

        • #5
          steel30
          Senior Member
          • Aug 2013
          • 2042

          Love the Kimbers!
          sigpic

          Comment

          • #6
            negolien
            Veteran Member
            • Sep 2010
            • 4829

            Don't forget to mark your mags and keep a notebook on the weapon. That way you can keep track of which mags and what ammo has issues. Grats on the Kimber though.
            "Men sleep peacefully in their beds at night because rough men stand ready to do violence on their behalf."

            George Orwell

            http://www.AnySoldier.com

            Comment

            • #7
              rogervzv
              Senior Member
              • Feb 2011
              • 2087

              Originally posted by The Gleam
              No offense, but only Ethiopians, Rwandans, and the Homeless suffer FTF.
              Hmmm. Well, I have six 1911s -- two Colt Gold Cups, a Colt Government, two Dan Wesson PM-7s, and this Kimber.

              The Series 70 Gold Cup was the worst as regards FTF and other problems. Once I replaced the spring with a 16 lb spring it functioned pretty good, but it did need a trip to Evans to get it squared away. The best 1911s out of the box were the Dan Wessons. Simple perfection.

              In my experience the higher end 1911s really do need a bit of breaking in and I am pretty confident that this Kimber Eclipse will be fine. I doubt it will need any gunsmithing. We'll see.
              Come and Take It!
              I'm the only hell my momma ever raised ...

              Comment

              • #8
                jameshenry
                Member
                • Jan 2011
                • 327

                When my 1911s start to act up I check my man grip and most of the time the problems go away.

                Comment

                • #9
                  redcliff
                  Calguns Addict
                  • Feb 2008
                  • 5676

                  Check your extractor tension as too much tension is a common cause of FTF/FTRB on 1911's that are otherwise well lubed and shooting good ammo out of good magazines.

                  Extremely tight fitted new 1911's can run perfectly from round one, but everything must be correctly machined, fitted, lubed and using good ammo and magazines.
                  "You keep using that word. I do not think it means what you think it means."
                  "What we get away with isn't usually the same as what's good for us"
                  "An extended slide stop is the second most useless part you can put on a 1911"

                  "While Ruger DA revolvers may be built like a tank, they have the aesthetics of one also,
                  although I suppose there are a few tanks which I owe an apology to for that remark"

                  Comment

                  • #10
                    sholling
                    I need a LIFE!!
                    CGN Contributor
                    • Sep 2007
                    • 10360

                    Originally posted by The Gleam
                    I get the break-in stage, believe me; but if there is a FTF on a new firearm, high-end 1911 or not (even on a Baer or Ed Brown) look for factors causing it.

                    People always accept or take this as "the norm" for 1911s, and I differ greatly on that, as I have had plenty of 1911s perform right out of the box without FTF - and if they did, I sought out the problem without any haste, to discover the cause (often, it's the mag not seating properly, or feed-lips out of whack). For other people, it has often been lack of proper lube.

                    Sounds like you got a winner, just need to work out the bugs.
                    Words of wisdom and excellent advice!
                    "Government is the great fiction, through which everybody endeavors to live at the expense of everybody else." --FREDERIC BASTIAT--

                    Proud Life Member: National Rifle Association, the Second Amendment Foundation, and the California Rifle & Pistol Association

                    Comment

                    • #11
                      Virus55
                      Senior Member
                      • Aug 2012
                      • 1697

                      I LOVE KIMBERS!!!
                      Active Law Enforcement
                      Certified Glock Armorer
                      Hunter & Fisherman
                      God Bless The USA
                      Lets Go Brandon!!!

                      Comment

                      • #12
                        The Gleam
                        I need a LIFE!!
                        • Feb 2011
                        • 13913

                        Originally posted by rogervzv
                        Hmmm. Well, I have six 1911s -- two Colt Gold Cups, a Colt Government, two Dan Wesson PM-7s, and this Kimber.

                        The Series 70 Gold Cup was the worst as regards FTF and other problems. Once I replaced the spring with a 16 lb spring it functioned pretty good, but it did need a trip to Evans to get it squared away. The best 1911s out of the box were the Dan Wessons. Simple perfection.

                        In my experience the higher end 1911s really do need a bit of breaking in and I am pretty confident that this Kimber Eclipse will be fine. I doubt it will need any gunsmithing. We'll see.
                        Oh, true. I was just jokingly being sarcastic as there are people out there that think it's the NORM for 1911s to FTF, and then they give the model a pass out of foolish pride, snobbery, the nostalgia, whatever.

                        At the same time, I truly don't think any new firearm of any kind, having fits of any kind, is acceptable. Yes, it happens, and when it does, jump on the issue and kill it; don't make excuses for the gun.
                        -----------------------------------------------
                        Originally posted by Librarian
                        What compelling interest has any level of government in knowing what guns are owned by civilians? (Those owned by government should be inventoried and tracked, for exactly the same reasons computers and desks and chairs are tracked: responsible care of public property.)

                        If some level of government had that information, what would they do with it? How would having that info benefit public safety? How would it benefit law enforcement?

                        Comment

                        • #13
                          nahpungnome
                          Senior Member
                          • Oct 2013
                          • 2159

                          Originally posted by The Gleam
                          No offense, but only Ethiopians, Rwandans, and the Homeless suffer FTF.

                          I get the break-in stage, believe me; but if there is a FTF on a new firearm, high-end 1911 or not (even on a Baer or Ed Brown) look for factors causing it.

                          People always accept or take this as "the norm" for 1911s, and I differ greatly on that, as I have had plenty of 1911s perform right out of the box without FTF - and if they did, I sought out the problem without any haste, to discover the cause (often, it's the mag not seating properly, or feed-lips out of whack). For other people, it has often been lack of proper lube.

                          Sounds like you got a winner, just need to work out the bugs.
                          Lol I'm none of those 3, but I did have FTFs within the first 498 rounds, but they were with WWB. Magtechs ran fine before and after I ran WWB. I attributed my failures to the ammo. WWB left my gun dirty as hell and the feed ramp was pretty crusty.

                          Comment

                          • #14
                            Garyson1311
                            Senior Member
                            • Feb 2009
                            • 539

                            I have an Eclipse Target II and I absolutely love it. Always get compliments at the range and your right about the accuracy and the trigger, they really are nice.

                            Congrats on your Kimber!

                            Comment

                            • #15
                              DArBad
                              Veteran Member
                              • Dec 2009
                              • 3002

                              Congrats on the Eclipse, a beautiful gun indeed. I have 2 Kimber Custom IIs that were 100 reliable out of the box even without cleaning!

                              Like what one poster said, check your extractor tension. I have had to adjust my extractors on 4 Colts and 4 Springfields.

                              Comment

                              Working...
                              UA-8071174-1