Unconfigured Ad Widget

Collapse

sig 225/p6 extractor problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • milsurpshooter
    Senior Member
    • Aug 2007
    • 1074

    sig 225/p6 extractor problems

    well my 225/p6 keeps stove pipeing and double feeding. dosen't matter if i clean it or oil it. that only seems to fix for a couple of mags and bam it starts back up again. any ideas? thanks
    Weatherby Vanguard 30-06, Ruger 10/22, Mossberg 500, sig-p6/225, springfield GI 45, .
  • #2
    JTROKS
    I need a LIFE!!
    • Nov 2007
    • 13093

    What kind of ammo are you using?
    The wise man said just find your place
    In the eye of the storm
    Seek the roses along the way
    Just beware of the thorns...
    K. Meine

    Comment

    • #3
      atasty39
      Member
      • Feb 2008
      • 120

      Not trying to be a smart a**, but there is a thread that discussed replacing all the 20 or so year old springs with new ones that takes care of the problem. Sorry I can not provide a link, but others were having the same issues. YMMV
      "The guilty seek punishment"

      Comment

      • #4
        ke6guj
        Moderator
        CGN Contributor - Lifetime
        • Nov 2003
        • 23725

        SIG P6/P225 Rearsenal Kits @ $19.50
        Jack



        Do you want an AOW or C&R SBS/SBR in CA?

        No posts of mine are to be construed as legal advice, which can only be given by a lawyer.

        Comment

        • #5
          milsurpshooter
          Senior Member
          • Aug 2007
          • 1074

          i just changed all the springs a little while back. and i'm using all kinds of differnt ammo. so i really don't know whats going on.
          Weatherby Vanguard 30-06, Ruger 10/22, Mossberg 500, sig-p6/225, springfield GI 45, .

          Comment

          • #6
            Mr. Meeseeks
            Veteran Member
            • Jan 2008
            • 2951

            Top Gun Supply also carry great rearsenal kits.

            However, I would suspect that your problem would be fixed with a fresh recoil spring and mag springs, as well as to sticking to 115gr ball ammo.

            Also wouldn't hurt to change the extractor, they've got 'em at Brownells.com. Good luck.

            Comment

            • #7
              duenor
              Vendor/Retailer
              • Mar 2007
              • 4617

              Swap springs (recoil, FP, mag), and clean gun thoroughly. a picture of your malf would help.
              Entreprise Arms - FFL 07 manufacturer of CA-Legal FAL type rifles in Baldwin Park, CA.
              EAI IMBEL-FAL 7.62x51 NATO, CA Legal: $999 shipped www.entreprise.com
              SIG, Beretta, Glock, XD, HK Tritium GS sights

              "Opinions posted in this account are my own and not the approved position of any organization."

              Comment

              • #8
                milsurpshooter
                Senior Member
                • Aug 2007
                • 1074

                Originally posted by duenor
                Swap springs (recoil, FP, mag), and clean gun thoroughly. a picture of your malf would help.
                well what it does is, i will fire a round and it will get half way extracted and caught on the fresh round underneath it in the mag. the only way to clear it is drop the mag and tilt the gun up and the spent case just falls out. so i think that i will change the extractor and see what happens. thanks for all the help everybody.
                Weatherby Vanguard 30-06, Ruger 10/22, Mossberg 500, sig-p6/225, springfield GI 45, .

                Comment

                • #9
                  Guntech
                  Senior Member
                  • Jun 2008
                  • 1722

                  Sounds like extractor same thing happened with one of my guns I didn't notice the extractor had been sheared off
                  " I think the National Rifle Association is more feared than any of those associations,"
                  -Bob Schieffer, CBS News chief Washington correspondent


                  Comment

                  Working...
                  UA-8071174-1