Unconfigured Ad Widget

Collapse

Glock 34 Troubleshooting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Caseless
    Senior Member
    • Jun 2005
    • 1668

    Glock 34 Troubleshooting

    My factory stock Glock 34 Gen 3 has this occasional failure to eject issue at the most inopportune time. e.g. on the MGM Ironman zipline. (Not my run, just an FYI)


    Failure rate is random but persistent. Once every 500 rounds during the MGM match, three times at a 200 rounds pistol match. Ammo factor has been eliminated. Using the same lot ammo in two other G17s never caused any issue.
    Since I don't have a large supply of 9mm ammo to troubleshoot this part by part, I plan to replace all suspect parts at once.
    Aside from the extractor. What else plays a role in extraction? Ejector? Recoil spring? Use some gen 4 parts?
    Last edited by Caseless; 09-26-2013, 10:27 AM.
  • #2
    Hans Gruber
    Senior Member
    • Jun 2005
    • 1901

    Replace your extractor. I had the exact same problem with my G34 last year that culminated in a less than stellar result at USPSA Production Nationals. I replaced mine with a friends but that one had the same issue. Replacing it with a brand new one fixed it 100%.

    Do a test, take an empty 9mm case and snap it under the extractor at the breech face. If it doesn't sit solidly flush with the breech face, if it rocks back and forth like it's unlevel, that's your problem.

    Good luck.
    Team Echo-Sigma!
    http://echo-sigma.com
    sigpic

    Comment

    • #3
      DFence
      • Feb 2012
      • 1368

      I wouldn't say ammo has been completely eliminated. Just because the ammo works fine in 2 other guns, doesn't mean the G34 is going to like it. But you are probably safe to say that the ammo is ok.

      I would change out the extractor first since its cheap and easy to do.

      If you contact Glock, they will find a armorer thats close to you to do the warranty work or send you the part. I have them in stock if you are close to the OC area.
      Its not paranoid.....its prepared.

      NRA Certified Pistol/Rifle/Shotgun/PPIH/PPOH Instructor | NRA Certified RSO | NRA Life Member | GSSF Life Time Member | Surefire Low Light Instructor | Glock Certified Armorer | Utah CCW Instructor | Nevada CCW Instructor

      Comment

      • #4
        tacticalcity
        I need a LIFE!!
        • Aug 2006
        • 10929

        Well if you're shooting at that level of competition I can't break out the old "blame the shooter" answer. LOL.

        Usually when hear stuff like this it is something the shooter is doing wrong. They are usually new and lack a solid foundation of shooting fundamentals. Clearly not the case here.

        So I agree, probably an extractor issue.

        If you get the extractor replaced and it continues then that particular gun just doesn't like that particular ammo. Happens all the time. I've seen it before. One gun will eat up something just fine, the exact same model gun has nothing but trouble with it. It happens. Few people run their guns as hard and as often as you do nor do they have so many similar guns so they never really make the connection.
        Last edited by tacticalcity; 09-25-2013, 2:51 PM.

        Comment

        • #5
          Caseless
          Senior Member
          • Jun 2005
          • 1668

          Thanks guys. I'll replace extractor only for now.

          Comment

          • #6
            tonyxcom
            Calguns Addict
            • Aug 2011
            • 6397

            Are you allowed to use an aftermarket one, like the Apex?

            Comment

            • #7
              Losd619
              Senior Member
              • Sep 2012
              • 925

              Originally posted by tacticalcity
              Well if you're shooting at that level of competition I can't break out the old "blame the shooter" answer. LOL.

              Usually when hear stuff like this it is something the shooter is doing wrong. They are usually new and lack a solid foundation of shooting fundamentals. Clearly not the case here.

              So I agree, probably an extractor issue.

              If you get the extractor replaced and it continues then that particular gun just doesn't like that particular ammo. Happens all the time. I've seen it before. One gun will eat up something just fine, the exact same model gun has nothing but trouble with it. It happens. Few people run their guns as hard and as often as you do nor do they have so many similar guns so they never really make the connection.
              How would an inexperienced shooter effect extraction problems?

              Comment

              • #8
                tonyxcom
                Calguns Addict
                • Aug 2011
                • 6397

                Limp wrist.

                Comment

                • #9
                  Caseless
                  Senior Member
                  • Jun 2005
                  • 1668

                  Originally posted by tonyxcom
                  Are you allowed to use an aftermarket one, like the Apex?
                  Yes, Trooper division at Ironman is an 'unlimited' Open division.

                  Comment

                  Working...
                  UA-8071174-1