Unconfigured Ad Widget

Collapse

DELETED

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    g19jk
    Member
    • May 2012
    • 204

    Originally posted by DCF
    Check to see if you have a 30274 ejector and a new extractor with a #4 on it.
    How do I find this out?

    Comment

    • #17
      roger1022
      Senior Member
      • Jul 2008
      • 2008

      Originally posted by g19jk
      How do I find this out?
      For the ejector, once you pull the slide off the number is on the right side.
      You can give peace a chance...

      We'll cover you if it doesn't work out...

      Comment

      • #18
        Donk310
        Senior Member
        • Oct 2009
        • 1798

        Interesting. I have no idea what could cause that.
        sigpic

        Comment

        • #19
          INFAMOUS762X39
          Senior Member
          • Jan 2012
          • 1458

          Originally posted by gao1976
          This.
          Changed my ejector and my g19 never had brass to face problem again.
          x4.

          Also updated my extractor to #4, now my G19 Gen3.5 is GTG now.

          Comment

          • #20
            Off the Roster
            Senior Member
            • Aug 2013
            • 2354

            +1 for fatigue

            Comment

            • #21
              berg
              Senior Member
              • Oct 2005
              • 1963

              You're writing "extract" but what you really mean is "eject".
              __________________________________________________ _____________________________________
              The whole problem with the world is that fools and fanatics are always so sure of themselves, and wiser people are full of doubts. - Bertrand Russell

              Comment

              • #22
                roger1022
                Senior Member
                • Jul 2008
                • 2008

                Originally posted by g19jk
                Okay, so I do have the 30274 ejector. Is that the one that is known to have issues?
                You should be fine. From reading around, the 30274 is the newer/redesigned ejector.
                You can give peace a chance...

                We'll cover you if it doesn't work out...

                Comment

                • #23
                  Mr.Caketown
                  Calguns Addict
                  • Jan 2011
                  • 7362

                  was she shooting like this?
                  WTB:
                  1)AR15 Aero Precision Skeletonized Lower
                  2)S&W 686 6in barrel ...686 No dash through 686-4
                  3) Saltworks M5 upper/lower set

                  Comment

                  • #24
                    roger1022
                    Senior Member
                    • Jul 2008
                    • 2008

                    Originally posted by DCF
                    Check to see if you have a 30274 ejector and a new extractor with a #4 on it.
                    Thanks for the heads up. I checked mines (Gen 4 purchased recently) and it has the 30274 ejector and #4 extractor.
                    You can give peace a chance...

                    We'll cover you if it doesn't work out...

                    Comment

                    • #25
                      DCF
                      Senior Member
                      • Jun 2009
                      • 1188

                      I believe Glock should have changed all the ejector and extractor on the newer guns.

                      I am not sure if OP is comfortable in taking apart the slide assemble to inspect the extractor. Bring it to the Glock armorer if you are not comfortable.

                      Comment

                      • #26
                        plumbum
                        Calguns Addict
                        • May 2010
                        • 5394

                        Originally posted by M1NM
                        Quit using steel cased ammo. It's obvious she has a magnetic personality.
                        Okay, not a single comment on this answer? Best response I have seen so far!


                        Anyway, I would be willing to bet her grip is on the weak side, and the gun is rotating/moving towards her during recoil.
                        Originally posted by ysr_racer
                        Please don't bring logic and reason into an interwebs discussion

                        Comment

                        • #27
                          Freq18Hz
                          Senior Member
                          • Apr 2011
                          • 1243

                          Welcome to the Magic of Glock Gen 4.

                          My guess is the gun has extractor issues AND she was limp wristing it. Bad combo.

                          If you want to rule out the gun, you'll need to shoot about 1000 rounds or so through it, and check the ejection pattern. If it's not consistent, it's the gun.


                          -Freq

                          Comment

                          • #28
                            DDRH
                            CGN/CGSSA Contributor - Lifetime
                            CGN Contributor - Lifetime
                            • Mar 2008
                            • 2756

                            sounds like a grip issue and not extractor or ejector. I had an extractor issue.

                            my Gen3 was fixed with a Gen2 (G23) extractor, works well, still get BTF sometimes, but not as bad.

                            Comment

                            • #29
                              chonkey
                              Senior Member
                              • Aug 2010
                              • 528

                              If it works fine when you shoot it then it's probably fine. For now it's more logical to assume it's a shooter induced problem since it only happens to her.

                              That said, if it eventually does happen to you there are known issues with BTTF for several years and there are many threads on calguns regarding it but in these instances they are consistently happening regardless of the shooter. There are several things you can do:
                              try a 3rd party extractor like Lone Wolf (may or may not help),
                              Use hotter ammo,
                              Apex extractor kit,
                              Find a local Glock armorer,
                              Send it to Glock (on your dime) They won't pay for shipping on this issue

                              Comment

                              Working...
                              UA-8071174-1