XD-9 Trigger Kit

[neonballoon]

I'm looking to upgrade the trigger on my stock XD-9 Service model.

Which trigger kit is best considering reliability between PRP, Springer, SA Custom shop or any other kits? Anyone have experience with the upgraded triggers?

[220]

Love my PRP. Started with the drop-in kit but ended up upgrading most all of it's parts to custom fit ones.

[squiddo]

Prp, easy install epic outcome

[AfisBoy]

Powder river drop in kit was easy to put in and a very effective upgrade. 1000+ rounds without problem.

[cfusionpm]

I also have the PRP drop-in kit. It was so nice on my XDM9 that I got it for my XD45 too. 1000s of rounds through XDM, couple hundred through XD45, perfectly reliable and great feel. Would never go back to factory trigger.

[Press Check]

I had the PRP Ultimate Match Target trigger in an old XDM that I owned, and it was definitely a nice piece of kit. Break and reset was extremely crisp and positive, and that's coming from a 1911 guy.

[NorCalNative]

I installed the Powder River ultimate match in my XD. I have to say that it was a big PITA. Lots of sanding and polishing, assembling and disassembling. I'm happy with the finished product, but I wouldn't do it again.

[Brandon04GT]

I know that for the most part you only have two options: PRP or Springer.

While I have an XD, I don't have experience with either. But I really like how the Springer kit utilizes a new and machined trigger bar to replace the factory bar which lots consider to be one of the weak links in the gun.

[vr6veedub]

PRP, easy drop in kit or if you want Ultimate, send the gun to them but thats more $$$. I have PRP in my XD9 and XD45 tac

[MossbergMan]

I had Springfield Armory Custom Shop install their match trigger. It is awesome and my factory warranty is intact. It's cost was on par with the PVP kit if I factored my time for installation.
Sending the gun back was a simple Fed-Ex transaction and was sent back directly to me. Turn around time was approximately 2 weeks.
It took some getting used to...there is no "slack" or take up. Place finger on trigger, dis-engage the trigger safety and you're up against the sear. Exactly 4.1 pounds of pressure and it's firing. Note it came from SA with a 2.1# trigger, I replaced the match spring for the factory trigger spring to get the 4 pounds.
Like the PVP the reset is very short and positive. And IMO it's as close to a 1911 trigger as a pivoting trigger can get.
Good to read the positive comments about PVP. I may get one for my XDM40 5.25, just for a comparasion.

[HDgasser]

It took me about 45mins to install the prp ultimate match trigger kit in my xd45 and it's 10000x's better than the factory crap trigger!

If your scared to use a file and sand paper spend the $$$ and have it done somewhere.