Unconfigured Ad Widget

Collapse

Does Glock 21 Use GAP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • David13
    Senior Member
    • Oct 2012
    • 901

    Does Glock 21 Use GAP

    I want to shoot a friend's gun tomorrow, and I want to be sure to use the right ammo.
    I have .45 acp but forgot to bring my Colt.
    Can I use that in my friend's Glock 21, or does it use gap.45?
    Thanks
    dc
  • #2
    Gutz
    CGN/CGSSA Contributor
    • Jan 2013
    • 4127

    It is ACP.
    1A - 2A= -1A :(

    Comment

    • #3
      11011500a
      Senior Member
      • Nov 2008
      • 940

      Glock 21 45acp
      Glock 37 45gap

      Comment

      • #4
        DRAB_81
        Senior Member
        • Feb 2009
        • 2482

        Since the G20 10mm can also shoot .40s&w out of the stock barrel with no problems, I'd be willing to bet it's fine to shoot GAP out of a .45acp G21. I don't know anyone that's done it, so I'd be interested to see how it works out. If you end up doing it, let us know how it goes.

        Comment

        • #5
          mcat707
          Senior Member
          • Feb 2009
          • 2346

          Originally posted by DRAB_81
          Since the G20 10mm can also shoot .40s&w out of the stock barrel with no problems, I'd be willing to bet it's fine to shoot GAP out of a .45acp G21. I don't know anyone that's done it, so I'd be interested to see how it works out. If you end up doing it, let us know how it goes.
          45ACP & 45GAP are two totally different calibers. I would not recommend shooting 45GAP out of a Glock 21.

          Check it out. 45GAP on LEFT and 45ACP on RIGHT.

          Comment

          • #6
            Maltese Falcon
            Ordo Militaris Templi
            CGN Contributor
            • Feb 2009
            • 6772

            Originally posted by mcat707
            45ACP & 45GAP are two totally different calibers. I would not recommend shooting 45GAP out of a Glock 21.

            Check it out. 45GAP on LEFT and 45ACP on RIGHT.

            Yep, Looks like a real bad idea. Don't do it.

            .

            Comment

            • #7
              repubconserv
              Veteran Member
              • Dec 2010
              • 3056

              Originally posted by DRAB_81
              Since the G20 10mm can also shoot .40s&w out of the stock barrel with no problems, I'd be willing to bet it's fine to shoot GAP out of a .45acp G21. I don't know anyone that's done it, so I'd be interested to see how it works out. If you end up doing it, let us know how it goes.
              No on both counts (out of a semi auto at least).

              Comment

              • #8
                Quiet
                retired Goon
                • Mar 2007
                • 30242

                Glock 21, 21SF, 21SF RTF2, 21Gen4 = .45ACP
                Glock 30, 30S, 30SF, 30Gen4 = .45ACP
                Glock 36 = .45ACP
                Glock 37, 37Gen4 = .45GAP
                Glock 38, 38Gen4 = .45GAP
                Glock 39, 39Gen4 = .45GAP
                sigpic

                "If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." - Dalai Lama (Seattle Times, 05-15-2001).

                Comment

                • #9
                  cid`
                  Member
                  • Apr 2013
                  • 180



                  pretty pictures!

                  Comment

                  • #10
                    DRAB_81
                    Senior Member
                    • Feb 2009
                    • 2482

                    Originally posted by repubconserv
                    No on both counts (out of a semi auto at least).
                    Tell that to my 2 G20SF's, and all the guys that have done the same with their G20's...

                    Comment

                    • #11
                      Oceanbob
                      I need a LIFE!!
                      • Jun 2010
                      • 12721

                      Originally posted by DRAB_81
                      Tell that to my 2 G20SF's, and all the guys that have done the same with their G20's...
                      Correct..!


                      I've run 500 rounds of .40 caliber thru my GLOCK 20 (10MM) without any changes. (No barrel change). Not a problem.

                      I've even loaded magazines of mixed .40 and 10MM, alternating 10, 40, 10, 40 etc...big BANG, little poof, big BANG, little poof....Runs fine.

                      While the 10MM headspaces on the front of the cartridge rim, the slide breach face actually captures the back of the cartridge as the round SLIDES UP UNDER the Extractor Hook. This is why the .40 runs. It get's hooked and held safely while the firing pin does it's job.

                      I don't know anything about .45GAP but if it is the same case diameter (a .45ACP short...haha) then it might run fine in a GLOCK 21. Maybe, maybe not.

                      May the Bridges I burn light the way.

                      Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.

                      Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728).

                      Comment

                      • #12
                        Some Velvet-Fisted Brute
                        Member
                        • May 2013
                        • 175

                        All of the calibers mentioned above (45 ACP, 45 GAP, 10mm auto, and 40 S&W) headspace off the cartridge mouth. For the uninitiated, what this means is that the cartridge's position in the chamber is established by the forward edge of the brass (in the front, anyway. In the rear, it is held by the bolt face). Basically, using 45 GAP ammo in a 45 ACP or 10mm in a 40, the case is not long enough to make contact with the front of the chamber. This means the only thing holding your round in the firing position is the extractor claw.

                        Chances are, most weapons would probably be able to fire the cartridge. But many (including myself and probably every manufacturer and most gunsmiths) would recommend against it. The reason a similar thing is generally ok with revolvers is that the cartridges are headspaced by the rim. So the difference in length between a 38 spl and 357 mag is of absolutely no consequence as far as the round's chamber position is concerned. If you try it in an auto, you'll possibly damage the extractor and/or foul the chamber throat. To understand the effects of a fouled chamber mouth, look up what happens when shooting lead bullets in a glock or roll-crimping handloaded cartridges in straight-walled cases like the 40sw or 10mm.
                        Sorry about the typos. I browse mostly on my tablet and phone, and neither the touchscreens nor the autocorrection apps like me much.

                        Comment

                        • #13
                          dachan
                          Senior Member
                          • Sep 2007
                          • 1973

                          Originally posted by Oceanbob
                          I've run 500 rounds of .40 caliber thru my GLOCK 20 (10MM) without any changes. (No barrel change). Not a problem.

                          I've even loaded magazines of mixed .40 and 10MM, alternating 10, 40, 10, 40 etc...big BANG, little poof, big BANG, little poof....Runs fine.
                          Just because it can be done, doesn't mean it should be done. Using ammunittion not specifically chambered for a particular firearm goes against pretty much all safety, manufacturer and common sense recommendations. Not something anyone should be espousing in a public forum.

                          Comment

                          • #14
                            Oceanbob
                            I need a LIFE!!
                            • Jun 2010
                            • 12721

                            Originally posted by Some Velvet-Fisted Brute
                            If you try it in an auto, you'll possibly damage the extractor and/or foul the chamber throat. To understand the effects of a fouled chamber mouth, look up what happens when shooting lead bullets in a glock or roll-crimping handloaded cartridges in straight-walled cases like the 40sw or 10mm.
                            I can only speak for my Glock 20 and the experience of dozens of others who shoot .40 in the 10MM barrel. (that I know about)

                            1. The difference in length between the .40 case and the 10MM case is small. Inspecting my barrels (I run two) I can't see any erosion on the chamber rim forward of the case at all. I don't have my Caliper handy but the difference in about 1/8th inch. I've run 100 rounds at a time of W white box .40 and after inspecting that gap behind the rim, no fouling could be seen. I then chambered some 10MM and ran 50 rounds without any problems. I just don't see an issue with crud or powder residue building up. Probably because that gap is so small and the powder burns almost completely. There is more residue at the end of the muzzle (powder flash) than inside the chamber. So for me with this platform it's a non-issue. If you think it could be an issue, then run a full diameter soft cleaning swap thru once in a while.

                            2. The extractor issue is also not a problem. The extractor isn't under stress any more running .40 than 10MM The extractor is going to capture the same case profile (because both cases are identical except for overall length) whether your shooting 10MM or .40.

                            The extractor holds the case up tight against the breach wall (aft). A firing pin strike isn't much forward tension at all considering that you could probably use a case in battery (against the back wall of the breach face) and lift the entire slide into the air. The extractor hooks the 10MM case fully and with a positive, strong grip; as soon as the round is fired the slide moves aft and the ejector trips the case (tumbles) out of the open slide.

                            In fact, I feel that the .40 round puts LESS stress on this movement because it is lighter than a 10MM round.

                            In the worse case, the extractor would fail to capture the .40 Rim. In that situation, the case would simple slide forward harmlessly and you could just jack open the slide and shake it out. Not a safety issue at all. But I've never had a .40 round FAIL to get captured by the extractor. Never.

                            We've had this conversation over at GLOCK TALK and here many times. The opinion is it is ok to run .40 in a 10MM Glock.

                            (as far as what the opinion of some GunSmiths might be, I ignore those opinions. The same as Gun Store Clerks. And that nice girl at the Drive-Thru at McDonalds)

                            May the Bridges I burn light the way.

                            Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.

                            Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728).

                            Comment

                            • #15
                              Some Velvet-Fisted Brute
                              Member
                              • May 2013
                              • 175

                              I didn't say erosion. I said fouling. As in, ading material and making the chamber smaller. Specific to straight walled cases, if the brass from a full-length round can be coaxed into loading past the chamber throat, you're going to get a kaboom. Early glocks experienced this with soft lead reloads. If too much of your bullet shaves against that lip when firing shorter cased cartridges through, chambering a full length cartridge can cause the brass to bite the bullet and spiike the chamber pressure to unsafe levels. This is why I mentioned roll crimping. This is a more common cause for a similar effect.

                              But hey, it's you gun and your hands and if someone on the internet told you it's alright, it certainly must be.
                              Sorry about the typos. I browse mostly on my tablet and phone, and neither the touchscreens nor the autocorrection apps like me much.

                              Comment

                              Working...
                              UA-8071174-1