Unconfigured Ad Widget

Collapse

Glock .40 -> 9mm conversion

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ThePeaceMaker707
    Member
    • Feb 2011
    • 147

    Glock .40 -> 9mm conversion

    I'm sure this has been answered a hundred times, so I probably just suck at searching the forums.. maybe somebody could point me in the right direction?

    What all is needed if I want to convert my G23 to 9mm? I know it's super simple to convert the caliber of an M&P, but what about a Glock?

    Also, does anybody have experience with this? Did the converted Glock perform as well as it did in the original caliber? Are there any issues or drawbacks to doing this?

    Any insight you guys can provide is much appreciated. Thanks!!
    "The power under the Constitution will always be in the people. It is entrusted for certain defined purposes, and for a certain limited period, to representatives of their own choosing; and whenever it is executed contrary to their interest, or not agreeable to their wishes, their servants can and undoubtedly will be recalled."
    --George Washington
  • #2
    Wicked K5
    Senior Member
    • Feb 2009
    • 830

    Wife got me a Storm Lake 40-9 conversion barrel for Xmas for my 23. So far, I have about 300 rounds through it with ZERO issues. It's a great barrel for the price IMO. My coworker and his brother both have 22s with LWD conversion barrels and both have had feed and ejection issues. From what I understand they estimate 95% reliability through ~600-700 rounds.

    Like I said, in my experience, it's been a great setup so far. Only thing I needed to add was magazines for a 19. I have read, that you don't really need the 19 mags- you can run your 23 mags, but they're not 100% reliable. Overall, I'm happy with my decision. Six months ago, I calculated that within about 1500 rounds, the barrel conversion would have paid for itself based on difference in cost of 9 vs. 40. Not sure about current conditions.

    Comment

    • #3
      ThePeaceMaker707
      Member
      • Feb 2011
      • 147

      Thanks for the input!
      "The power under the Constitution will always be in the people. It is entrusted for certain defined purposes, and for a certain limited period, to representatives of their own choosing; and whenever it is executed contrary to their interest, or not agreeable to their wishes, their servants can and undoubtedly will be recalled."
      --George Washington

      Comment

      • #4
        nimbus
        Senior Member
        • Nov 2009
        • 674

        I have Lonewolf conv barrels for both my G35 and G23. Both have been 100% over 500rds each with just the barrel and a 9mm mag. I've run them w/ 40 mags a couple of times and no problems either.

        Comment

        • #5
          Bodh1
          Member
          • Dec 2012
          • 436

          Originally posted by nimbus
          I have Lonewolf conv barrels for both my G35 and G23. Both have been 100% over 500rds each with just the barrel and a 9mm mag. I've run them w/ 40 mags a couple of times and no problems either.
          Not to go too off topic...does your lonewolf ever not lock back after the last round?

          Comment

          • #6
            Lumpia is sarap!®
            Senior Member
            • Mar 2008
            • 2267

            I'm that 1%. My Lone Wolf 40-9 conversion barrel had a lot of failure to feed and extract. So I got rid of the Lone Wolf and bought a G17. To any customization, there will be a chance of unreliable functionality. That just my take.
            sigpic

            Comment

            • #7
              Bodh1
              Member
              • Dec 2012
              • 436

              I'm that 1%. My Lone Wolf 40-9 conversion barrel had a lot of failure to feed and extract. So I got rid of the Lone Wolf and bought a G17. To any customization, there will be a chance of unreliable functionality. That just my take.
              Yeah, I have one for my G19 to shoot lead through, but it doesn't always lock back after the last round...
              Last edited by Bodh1; 04-18-2013, 10:29 PM.

              Comment

              • #8
                Powder_Keg
                Senior Member
                CGN Contributor
                • Jan 2013
                • 2203

                I have a G23 and a Lone Wolf 40-9mm conversion barrel. I use my .40 magazines and I have had zero issues. No FTE and my Glock locks back after the last round. I have put 220 round thru it so far and as far as accuracy, the Lone Wolf is good to go! I got mine with a "blind mark" for an additional $15. Instead of Lone Wolf putting their logo on the exposed part of the barrel, they put it on the bottom side by the lug. The barrel cost me $115+15 and I had it 30 days later.

                The thing you need to be aware of and I think it would probably be the same no matter what brand barrel you went with, you should run good ammo with the 9mm barrel. If you run cheap under powered ammo, you might get erratic ejections and the occasional brass to face. I get solid 3:00 or 4:00 ejections with the .40. I tested the 9mm conversion barrel with 6 different ammos all back to back and the cheap stuff ejected all over the place. When I ran Remington or American Eagle, it ran just as solid as my .40 ammo. The G23 extractor and ejector are different than the 9mm version and the conversion barrels are asking the gun to run double duty. Hope the info helps.

                Here is a better explanation from Lone Wolf:
                Lone Wolf Arms is the largest manufacturer of aftermarket parts for Glocks. We also have M&P Shield, Beretta/Taurus, and Browning Hi-Power parts.

                Comment

                • #9
                  wurger
                  Senior Member
                  • Dec 2011
                  • 1433

                  Glock 35 + LWD 40-9 + Glock 9mm mags = zero issues for me.

                  Couldn't load more than 5 9mm rounds in my .40 mags before they started to pop out. Didn't even try to shoot them. Just got 9mm mags.

                  So far, shot PMC Blazer and WWB 9mm through the LWD barrel.

                  Comment

                  • #10
                    Zerorye351w
                    Senior Member
                    • Mar 2012
                    • 528

                    Done it with my G22, used a Lonewolf 357sig and 9mm conversion barrel. Ran well with factory G22 mags. I also used my G22 mags in my G19.

                    Comment

                    • #11
                      Jet Setter
                      Calguns Addict
                      • Aug 2012
                      • 5348

                      I have a Wolf barrel for my G27. Have not used it yet but I have it.

                      I have used Storm Lake barrels for M&P. I much prefer Storm Lake to Wolf or KKM. Much better IMO.

                      All you need is a conversion barrel and mags. Presto - a new caliber handgun. The aftermarket barrels are break for Glocks as you can reload lead bullets and shoot them through the aftermarket barrels. Can't do that with the stock barrels.
                      Last edited by Jet Setter; 04-18-2013, 11:26 PM.
                      *********************
                      WTS:
                      1. PW 800+ Hydro Multispeed (just the hydraulic unit that also works with Spolar press)
                      2. PW 800B converted to 800C (12 gauge) with lots of accessories and upgrades
                      3. Hornady 366 (12 gauge)

                      Comment

                      Working...
                      UA-8071174-1