got a g19 thats having fte. stove piping
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
glock 19 extractor
Collapse
X
-
Tags: None
-
No need to send it back. Just get the new Extractor from a Glock Armorer for free. Takes only 3 minutes to change it out. No big deal. An 8 dollar part.
Can you read the number on the Extractor?
Congrats..! Nice weapon.
Bob
EDIT: Please confirm it is a GEN4 or GEN3...thanksMay the Bridges I burn light the way.
Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.
Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728). -
If you were local in Ventura County I could walk you through the disassembly. But honestly it's a lot simpler than you think. I'm sure someone local will pop in here to help out or head over to your local dealer and ask if one of the employees can run you through a complete disassembly.
But as Oceanbob stated, a local Glock armorer should be able to replace that pup for you so you don't need to send it in.
Luis JrComment
-
Uograde to a 30274 ejector. That's the number GLOCK is replacing the 336 with. I think LoneWolf sells a new one that works.May the Bridges I burn light the way.
Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.
Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728).Comment
-
Glock disassembly isn't too difficult. If you have the time, watch this video. It does a pretty good job describing how to take the Glock apart completely. You'd be surprised how little parts there are.
Comment
-
Seems odd that Glock has been making this pistol for decades yet they get it wrong in 2013. You would think they could spot a bad batch of parts by now. I have a Gen 3 from 98 and it drops all the brass at 4pm 4 feet away. I could put a bucket there and catch all my brass its been that predictable. Sorry to hear you are having problems. I'm sure glock will make it right.Comment
-
Took the above listed ejector and Apex extractor to get my gen 3 G17 & G19 working good as they should have from the factory.Comment
-
That's sad that this issue is still not resolved after all these years.
These dipped/mim extractor started to show up in 2010??
Might be the extractor or recoil spring...
I replaced the extractor (Lone Wolf) and a non captive RSA on my 19 with a pound lower spring, 336 left as is, seems okay to me now.
Apex also have a premium extractor.
But, try a G-armorer first, hopefully it will be fixed with no expense.Comment
-
I have a Feb 2010 G17 (NEB***) and a Feb 2009 G19 (KUU***) neither of which have this issue. I believe the issue is related to the "dip" extractor:That's sad that this issue is still not resolved after all these years.
These dipped/mim extractor started to show up in 2010??
Might be the extractor or recoil spring...
I replaced the extractor (Lone Wolf) and a non captive RSA on my 19 with a pound lower spring, 336 left as is, seems okay to me now.
Apex also have a premium extractor.
But, try a G-armorer first, hopefully it will be fixed with no expense.
Potently problematic extractor on the left.

More details on this issue:
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote." B.Franklin,1759Comment
-
Same thing happened to my G19 Gen3, as well as a nice little burn mark on my left temple a while back.
I didn't want to send it to Glock, but did manage to fix the issue myself with a little research and testing.
I bought a Gen4 trigger housing and took out the updated 30274 Ejector. Installed the new ejector on my Gen3 Trigger Housing. Also ditched the dipped MIM extractor for a OEM Non-Dipped Carbon extractor. Total parts cost 25$ Shipped?
No more Brass to the face for me. Ejects 4 o'clock all day.Comment
-
I had the same problem with a Gen 4 Glock 19. I contacted Glock and they either want me to ship the gun to them on my dime to get it fix, or only ship the new ejector and new extractor to a Glock certified armorer. I had to contact a local Glock armorer for him to contact Glock and have the parts ship to him. He then change out the parts for me free of charge, of course I paid him for his work.
I tested the gun afterwards and no more brass to the face. I was disappointed at how Glock handled the problem and soon I sold the gun. That was my first Glock and probably will be my last. I like the simplistic design of the Glock, just didn't like the CS, the grip, and the recoil impulse.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,971
Posts: 25,178,133
Members: 358,862
Active Members: 5,382
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 43956 users online. 31 members and 43925 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment