Glock 27 slide stuck

[AndRenner]

Need your guys help, got my frame cerakoted today, go to put the slide on andddddd i got it stuck. Noob mistake on my part I'm sure, or it could be some cerakote left on the rails I'm not sure. Either way the slide won't budge and I don't wanna take a rubber mallet to it lol. If I pull the trigger the slide will rack back about half an inch, trigger will not "click". Take down pins do nothing. Tried youtube and google but no one had my exact problem. What do I do? ThanksImageUploadedByTapatalk1358734051.490558.jpgImageUploadedByTapatalk1358734071.366938.jpg

[knerona]

Are you able to get the slide off?

[Oceanbob]

Try this: Remove the slide cover plate (on the back of the slide) , slide out the extractor spring, firing pin and remove the extractor. Good luck.

[glock21fan]

Im guessing you cant get the slide off. If you can than do so and check everything. If its stuck. You probably will need to apply some mallet finesse. Where r u located ? The take down lever may have been put in backward s and that very well could be the issue

[glock21fan]

Pic looks like maybe the recoil spring is off kilter too

[NYT]

my 27 has done the same thing, I fixed it by pulling the trigger and pulling the slide back at the same time.

Sent from my Galaxy Nexus using Tapatalk 2

[AndRenner]

Try this: Remove the slide cover plate (on the back of the slide) , slide out the extractor spring, firing pin and remove the extractor. Good luck.

Bingo. You are the man!!!!! Thanks a bunch

[tal3nt]

Another Calguns success story

[5.56Geo]

man I love this place!

[Raider888]

What caused the slide stuck?

[SixPointEight]

Looks like recoil spring installed wrong

[AndRenner]

What caused the slide stuck?

Not 100% sure, I think It was a mixture of the recoil spring not being seated correctly and some of the cerakote on the frame rails cause you could see where it had pealed it up. Took some emery cloth to the rails, double checked everything, reassembled it and it went fine. Love calguns!

[opie4386]

I love the smell of VICTORY!!!!!

[Lumpia is sarap!®]

Nice OD! Glad you figured it out. I got one too, but I didn't have to paint it: