Glock with a stock?

[ap3572001]

Anyone knows whats the deal with that.? I saw an Israeli made stock for Glocks. And heard at 5-6 different versions on its legality?

[JHC]

That would make it an SBR and that's a no-go in CA

[Knight]

Don't be shocked, but there's a block on having a stock on your Glock.

[kap]

That would make it fun, therefore it is illegal.

[Librarian]

That would make it fun, therefore it is illegal.

Right.

Basic principle in California:

If it's cool or fun, the Legislature does not want you to have it.

[-hanko]

Anyone knows whats the deal with that.? I saw an Israeli made stock for Glocks. And heard at 5-6 different versions on its legality?

https://www.zahal.org

do not do it.

-hanko

[Knauga]

It'll also make it an assault weapon unless it some how makes the pistol grip not a pistol grip.

[fun2none]

It'll also make it an assault weapon unless it some how makes the pistol grip not a pistol grip.

To make it California compliant, perform the following before attaching the stock:

1) Use a non-detachable 10-ten round magazine (grind down the mag catch or use a sheet metal screw through the grip's heel pocket into a 10 round mag)
2) replace the pistol barrel with a 16" impulse barrel (this is going to be $$$)
3) make sure the overall length is NOT less than 30"

Reloading requires a tool to remove the magazine or disassembly of the action, therefore it does not accept "detachable" magazines.

Anyone see a problem with this approach ?

[mymonkeyman]

To make it California compliant, perform the following before attaching the stock:

1) Use a non-detachable 10-ten round magazine (grind down the mag catch or use a sheet metal screw through the grip's heel pocket into a 10 round mag)
2) replace the pistol barrel with a 16" impulse barrel (this is going to be $$$)
3) make sure the overall length is NOT less than 30"

Reloading requires a tool to remove the magazine or disassembly of the action, therefore it does not accept "detachable" magazines.

Anyone see a problem with this approach ?

What's an impulse barrel? Also, ugly?

Maybe someone can make a 13+" flash hider and weld it on.

[JHC]

If your going to wish for a Glock you cant have it might as well be this one

http://www.weaponevolution.com/forum/showthread.php?t=256

[bwiese]

Don't put a buttstock on your pistol - or you'll be someone's "butt stock" in prison.

[Knauga]

This guy NEEDS to travel with some heavy firepower... I'm just saying

[Jicko]

IGB 16" barrels for Glocks

$250, not too bad

http://www.lonewolfdist.com/Products.aspx?CAT=146

[fun2none]

If your going to wish for a Glock you cant have it might as well be this one
http://www.weaponevolution.com/forum...read.php?t=256

Looks like a Glock top end (slide/barrel assembly) mated to proprietary folding grip frame.

[fun2none]

What's an impulse barrel? Also, ugly?

Maybe someone can make a 13+" flash hider and weld it on.

Jicko found the link for the Impulse gun barrels.

These barrels have a built in booster, like the MG42 machine gun, which is essentially an annular gas piston. The added mass a 16" barrel might absorb too much recoil energy that is used to cycle the action. So the gas piston provides an additional kick to assist cycling. You end up with a gas-assisted recoil action, like an MG42.

As for me, I would just use a MechTech carbine conversion unit with non-detachable magazine in a Glock frame, if I really wanted a 9mm Glock carbine.