Help, hopped sear!!

[Euphoria526]

Like the title said, my cz SAO has a hopped sear and I'm not sure how to fix it. I've googled and youtubed most combination of words and all I end up with is airsoft answers, no real guns.
So please, any and all answers from those who actually work on guns please help!!!
Yes I want to do this myself I just need to know how to.
Thanks.
Euphoria.

[JeremyS]

The hammer isn't catching on the sear? Unless the sear is just stuck "up," check to see if the sear blade is worn out or if it's the hammer hooks. Then, buy new, harder ones from CGW

If it's stuck, take the gun apart and figure out what's up. zfields posted a good photo tutorial on here on how to detail strip a CZ if you haven't done it before.

[Euphoria526]

The hammer isn't catching on the sear? Unless the sear is just stuck "up," check to see if the sear blade is worn out or if it's the hammer hooks. Then, buy new, harder ones from CGW

If it's stuck, take the gun apart and figure out what's up. zfields posted a good photo tutorial on here on how to detail strip a CZ if you haven't done it before.

I know I can load and ready then gun, it's not releasing the hammer and firing. I can make the hammer drop If I play with it but I'm not going to fire the gun that way. I just need to get off my *** and do it, I'm just afraid ill muck it up some how lol. I really just need a rubber mallet and a punch I believe.

[JeremyS]

Oh that's the opposite of what I thought was happening (sear not catching when the case is that it's not releasing). Does your SAO have a trigger that's adjustable for overtravel? Maybe it's just not going far enough back to lift the sear high enough to clear the hammer hooks.

If you look down into the back of the slide where the hammer goes into the frame, you'll be able to see the sear blade resting across the hammer and the hammer hooks sitting on it. Pull the trigger (I don't need to remind you to safety check the gun, right? ) and see how high the sear blade goes. Obviously it has to go high enough that the hammer hooks fall under it. If that isn't happening, something needs to be adjusted or fixed.