Glock 19 problem need some advice

[LAKings22]

Hopefully you didn't mess with your trigger

Nothing touched on my trigger. That's crazy that it would do that so many times. I'm done with doing that with live ammo.

[LAKings22]

Hopefully you didn't mess with your trigger

As for chambering it at the range - if you go home, you'll be driving with a loaded weapon. Not legal in most cases. Just throwing that out there.

You kidding me, I've worked to hard to buy my guns. The last thing I'm gonna do is drive around with a chambered gun and knowing my luck get busted, pick up a felony and not be able to legally purchase another gun.

[VictorFranko]

What... the... F...?

Why IN THE WORLD do you do that?

You read my mind!

[Rattlehead]

Is your feed ramp clean? I know if i dont clean mine after 150+ rounds its dirty and the feed ramp is really rough.

Glock's should not need their feed ramps cleaned after only 150 rounds.

I've run at least five of my Glock's in excess of 5-7k without cleaning anything.

[Rattlehead]

Last round not feeding. Every now and then I take my glock chamber it, remove mag, and clear the chamber. I do this until all 10 rounds are cleared. I do this with both mag's then i load both mag's back and put it back in it's place. This time I had a problem (no the gun didn't go off) everytime it came to the last ammo, it wouldn't feed the chamber (both mag's). So I loaded both factory mag's with dummy rounds and no problems all rounds chambered and cleared. So I take a 3rd Non factory mag with live rounds and all rounds chamber and clear just fine. So what's the deal with both these factory mag's not feeding the last live round?

This is the last round, right after I rack the slide and release


This is after I rack it back one more time so it let's me release the mag

You are most likely inducing bullet set back; do not re-chamber a SD round more than 1-2 times if you plan on using it.

I have had feeding issues with bullet setback by the front of the case hitting the chamber area, the gun would not feed the round since the bullet was pushed so far back in the case.

[JTROKS]

I chamber ny hangun many times and never have bullet set back. Well it's a S&W 640.




. Just kidding.

Please don't chamber your pistol in such manner. I don't like doing it when I hear weird noises late at night and the dog start running towards the noise barking like crazy.