Unconfigured Ad Widget

Collapse

HK USP40 problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Justang
    Member
    • Jan 2005
    • 396

    HK USP40 problem

    The problem started one day while shooting. The trigger wouldn't pull all the way back, thus it would not fire. Prior to this, the gun has never malfunctioned. I field stripped it to find nothing obviously wrong.

    Here's the symptoms:
    - pulling the trigger in double action, the hammer will only cock back into the single action position. (this happens wether the safety is on or off.) The trigger feels as if it should go further, but it does not.
    - Once the hammer is cocked the trigger will not cycle the trigger to fire. (hope that makes sense).
    ----But if I use the decock, the hammer will decock only half way some of the time, and 3/4 of the way some of the time. It doesn't seem that the hammer will fully decock.

    Here is some other info... This is an early model HK USP40 Var. 1. It was bought in 1993. Doesn't even have a polygonal barrel... still has the factory land and groove barrel. It's got a very low serial number(in the 1000's). The gun has close to 40,000rds through it (90% lead so the barrel is still in decent shape).

    I called HK, but the customer service was closed for the day. I left a message.

    Any ideas on what this could be?
    What about the warranty? Is there one at this point? I am the 2nd owner, my dad was the first.

    Sorry if this is hard to read. I think I lack some of the terminology to properly convey the problem.

    Thanks
    J
  • #2
    sohijiro
    Junior Member
    • Jan 2006
    • 68

    detail strip it, i heard usp's have a tendancy to break their firing pins . but detail stripping will tell you the problem.

    Comment

    • #3
      phish
      Veteran Member
      • Jan 2006
      • 3089

      I thought this was some joke thread, I have the exact model.

      I understand your problem, but I haven't experienced it. The sucky thing is that HK is a pain in the butt to deal with.

      I'll take a look at my frame later tonight, maybe I can help diagnose your issue.

      Comment

      • #4
        Justang
        Member
        • Jan 2005
        • 396

        It's in the frame. Doesn't seem like a firing pin problem.

        Travis from HK called me back and told me to send it to their Alabama office.

        Comment

        • #5
          Prospector
          Senior Member
          • Oct 2005
          • 1056

          Let see if I can give it a try.

          Originally posted by Justang
          - pulling the trigger in double action, the hammer will only cock back into the single action position. (this happens wether the safety is on or off.) The trigger feels as if it should go further, but it does not.
          This would be if you have DA/SA mode with a live round in.

          Originally posted by Justang
          ----But if I use the decock, the hammer will decock only half way some of the time, and 3/4 of the way some of the time. It doesn't seem that the hammer will fully decock.
          This is what the decock does, when in use the hammer will land half way before touching the firing pin. its for safety.

          Comment

          • #6
            Justang
            Member
            • Jan 2005
            • 396

            GSI Inc
            7661 Commerce Ln.
            Trussville AL 35173
            205-655-8299

            Comment

            • #7
              Justang
              Member
              • Jan 2005
              • 396

              Originally posted by Prospector
              Let see if I can give it a try.



              This would be if you have DA/SA mode with a live round in.



              This is what the decock does, when in use the hammer will land half way before touching the firing pin. its for safety.
              No live round it it. I don't think you followed what I said. With the hammer down, I pull the trigger and it only cocks the hammer back. It does not follow through with the hammer strike. This happens wether the safety is on or off.

              Yes, that is what decock is. I understand decock and how it works. But this is an abnormality. Normally the decock will stop the hammer just prior to striking the firing pin. When it does it now, it stops half way inbetween and has a soft sound, instead of the normal decock clack.

              Hope that cleared things up...

              Comment

              • #8
                Prospector
                Senior Member
                • Oct 2005
                • 1056

                Probably a little dirty I would say. My control lever once didn't move at all. I clean it, put grease in it and its all better.
                Try cleaning it.

                Comment

                • #9
                  Prospector
                  Senior Member
                  • Oct 2005
                  • 1056

                  Justang
                  Check your pm.

                  Comment

                  • #10
                    Justang
                    Member
                    • Jan 2005
                    • 396

                    Got the PM.

                    I cleaned it. But didn't disassemble the frame. I just sprayed gun cleaner in the trigger area. Should I take the pins out, disassemble the frame and clean and lube it?

                    Comment

                    • #11
                      Prospector
                      Senior Member
                      • Oct 2005
                      • 1056

                      Which pin?

                      Comment

                      • #12
                        Justang
                        Member
                        • Jan 2005
                        • 396

                        pin at the bottom of the grip. Looks like if I take that out the spring and shaft should come out.

                        Comment

                        • #13
                          Prospector
                          Senior Member
                          • Oct 2005
                          • 1056

                          Correct, the shaft comes out from the top.

                          Comment

                          • #14
                            markymark
                            Senior Member
                            • Oct 2005
                            • 1295

                            Originally posted by Justang
                            pin at the bottom of the grip. Looks like if I take that out the spring and shaft should come out.
                            just leave it the way it is and send it in. they may try to blame the problem on you if you don't know what you're doing.

                            Comment

                            • #15
                              choochboost
                              Member
                              • Dec 2005
                              • 170

                              Travis at HK is a great guy to deal with. He WILL take care of you.

                              Comment

                              Working...
                              UA-8071174-1