Unconfigured Ad Widget

Collapse

92FS chamber indicator question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rand B. Wilson
    Member
    • Jul 2012
    • 212

    92FS chamber indicator question

    Just picked up my new 92FS. I've noticed that when a round is in the chamber the indicator does not look or feel any different than when it's empty.. Am i doing it wrong ?
    how visible/tactile is your indicator?
    -- Sent from my iPad using nothing more than my fingers
  • #2
    corcoraj2002
    Senior Member
    • Dec 2010
    • 636

    It is a very slight red indicator. I can barely tell when there is a round. It definitely would not passed the smell test today.
    I support the NRA, if you are not in, you can't win.

    Comment

    • #3
      Bobby Ricigliano
      Mit Gott und Mauser
      CGN Contributor
      • Feb 2011
      • 17439

      The 92F is the easiest gun in the world to do a manual chamber check.

      Comment

      • #4
        Rand B. Wilson
        Member
        • Jul 2012
        • 212

        Originally posted by Bobby Ricigliano
        The 92F is the easiest gun in the world to do a manual chamber check.
        Thank you.. but doesn't really have anything at all to do with my question. How easy is a manual chamber check in the dark?
        -- Sent from my iPad using nothing more than my fingers

        Comment

        • #5
          sneather
          Member
          • Apr 2011
          • 308

          As stated. The LCI is a mere technicality on the ol' 92. Even if you take the damn extractor off the gun, it's still super tiny. It's really just a proper extractor, with a little color at the tip. However, the fact that Beretta didn't try and make it perform double-duty, is probably one of the reasons the gun is so reliable, and so widely used by people who need such reliability.

          Comment

          • #6
            a308garand
            Member
            • Mar 2009
            • 303

            Originally posted by Rand B. Wilson
            Thank you.. but doesn't really have anything at all to do with my question. How easy is a manual chamber check in the dark?
            Easy to miss feeling the extractor for a chamber check.

            Slightly retract slide and use the tip of your finger to feel along the top of the barrel (rearwards, towards the rear sight). When your finger drops past the barrel chamber, feel for brass. If no brass, you will feel the empty chamber.

            Easier to do than to write about
            sigpic

            Comment

            • #7
              orangeusa
              • Jul 2009
              • 9055

              I agree - doing a press-check works. Heck - I had to take a tactical pistol class to figure out how to do one. I felt pretty silly after learning how easy it was to do.

              I have had many 92/96 variants, and still not sure the chamber indicator (extractor) does much..

              Comment

              • #8
                Bobby Ricigliano
                Mit Gott und Mauser
                CGN Contributor
                • Feb 2011
                • 17439

                Originally posted by Rand B. Wilson
                Thank you.. but doesn't really have anything at all to do with my question. How easy is a manual chamber check in the dark?
                Still pretty easy. Easier than seeing that little strip of metal in plain daylight.

                Shot M9's in the Military.
                Went through a 5 month Police Academy with an issued 92F
                Carried one on and off duty for years and years

                Just offering my .02 brother

                Comment

                • #9
                  9mmepiphany
                  Calguns Addict
                  • Jul 2008
                  • 8075

                  Originally posted by Rand B. Wilson
                  Thank you.. but doesn't really have anything at all to do with my question. How easy is a manual chamber check in the dark?
                  Pretty easy.

                  Grab slide in overhand grip, retract slide slightly, about .5", touch casing with tip of pinky...or not
                  ...because the journey is the worthier part...The Shepherd's Tale

                  Comment

                  • #10
                    Code7inOaktown
                    Senior Member
                    • Jun 2010
                    • 632

                    Originally posted by a308garand
                    Easy to miss feeling the extractor for a chamber check.

                    Slightly retract slide and use the tip of your finger to feel along the top of the barrel (rearwards, towards the rear sight). When your finger drops past the barrel chamber, feel for brass. If no brass, you will feel the empty chamber.

                    Easier to do than to write about
                    I disagree. With no round in the 92F, the extractor does not raise above the frame. With a round in the chamber, it sits up about 2mm. You really can't miss it if you know your weapon. It's certainly easier than other pistol I think of going just by extractor height.


                    I should add, I mean by touch not sight.
                    Last edited by Code7inOaktown; 07-22-2012, 12:16 PM.

                    Comment

                    • #11
                      StefanJanowski
                      Senior Member
                      • May 2012
                      • 591

                      Its about the same on my 84fs, the indicator is barely visible when it is loaded.
                      http://www.1911addicts.com/showthrea...911-addicts...

                      Message me if you have the following:

                      PreLock Smith & Wesson Revolvers
                      Performance Center 1911

                      XDm 5.25 40sw

                      10mm ANYTHING , AMMO, PISTOLS, ETC

                      Comment

                      • #12
                        Old4eyes
                        Senior Member
                        • Feb 2010
                        • 1758

                        The "loaded chamber indicator" on a 92 is really the extractor. The design is such that the tip of the extractor sitting in the valley of the cartridge just in front of the rim causes the extractor to flex back slightly. They paint the top of the extractor red and so it becomes a loaded chamber indicator, of sorts. I can't see mine well, and it's really just a fingernail test that would give a positive indication. Not something I would depend upon.

                        To the fellow that says his indicator is sticking up 2mm, well I'd check that extractor to see if that tip has a huge growth on it. The loaded chamber indicator on my XD pops up 2mm, and that is huge compared to the sliver of exposed extractor on the 92.
                        Send Lawyers, Guns and Money - On second thought, hold the Lawyers.

                        Comment

                        • #13
                          Mr. Beretta
                          Calguns Addict
                          • Dec 2005
                          • 6614

                          Originally posted by Code7inOaktown
                          I disagree. With no round in the 92F, the extractor does not raise above the frame. With a round in the chamber, it sits up about 2mm. You really can't miss it if you know your weapon. It's certainly easier than other pistol I think of going just by extractor height.


                          I should add, I mean by touch not sight.

                          I agree 110%.

                          It was designed so you don't even have to look at the gun. Just rub your fingers over the extractor & you'll feel it raised up. Gun is loaded!

                          It's worked without fail for me since 1985!

                          Comment

                          Working...
                          UA-8071174-1