1911 40cal?

[SNEAKS]

Does anyone make a 1911 in 40cal that is on the CA approved list?

[1911whore]

contact Brandon at SVI, he will hook you up. plan on spending about 3000

[1911whore]

also check the list, i believe the Para 40 cal limited single stack is on there. I think. that will be about 950

[ar15barrels]

Barsto Precision's 40 is an STI frame that Barsto puts together for $2300.

http://www.barsto.com/barsto_guns.cfm?ID=BS40

[PLINK]

My friend has that Barsto and it is very nice.

[apbrian112]

yeah, i handled one before, great gun and cali-legal...

[Miltiades]

Buy a 10mm and get conversion barrel

I think your best bet might be to buy a 10mm - I think Kimber has one or two approved in CA - and get a conversion barrel for the .40 caliber. I believe this is feasible, although I haven't done it yet. I have a 10mm 1911 and have considered this. The Jarvis company might make these barrels.

[8200rpm]

Barsto Precision's 40 is an STI frame that Barsto puts together for $2300.

http://www.barsto.com/barsto_guns.cfm?ID=BS40

So when did they stop engraving "BS40" on the slide?

Next time when I have $2300 to throw down for a sidearm, that's going to be my L-10 gun.

GAWD!!!!!!!!!! In the last 30 days, I spent enough $$$ for "routine" maintenance and power windows at the Honda and Subaru dealership to buy that Bar-Sto and 1,000 rounds of factory 40S&W.

[TMC]

I think your best bet might be to buy a 10mm - I think Kimber has one or two approved in CA - and get a conversion barrel for the .40 caliber. I believe this is feasible, although I haven't done it yet. I have a 10mm 1911 and have considered this. The Jarvis company might make these barrels.

Its been done a bunch. Jarvis, KKM, Schuemann, Ed Brown, Kart, STI, Clark and others make barrels. Most are fully ramped so you'll need the frame cut.

[ar15barrels]

So when did they stop engraving "BS40" on the slide?

I think after the first 20 or 50 units.

My friend bought like 5 of them and re-sold them.
They are sorta like curios now.
How many people have a gun with BS on it?

[8200rpm]

Where do you find 10 round mags for these Bar-Sto's?

[Franksremote]

Its been done a bunch. Jarvis, KKM, Schuemann, Ed Brown, Kart, STI, Clark and others make barrels. Most are fully ramped so you'll need the frame cut.

The 10s and .40s come with a ramped barrel from the factory. New barrel fitted and ur g2g.