Unconfigured Ad Widget

Collapse

DERYA DY9 SIGHTS.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • OLD-skool454#3
    Senior Member
    • Apr 2024
    • 554

    DERYA DY9 SIGHTS.

    Had to reverse them...the force was too strong lol.
    Attached Files
  • #2
    Raptor3000
    Veteran Member
    • Jul 2011
    • 2819

    Originally posted by OLD-skool454#3
    Had to reverse them...the force was too strong lol.
    How did you reverse?

    Comment

    • #3
      OLD-skool454#3
      Senior Member
      • Apr 2024
      • 554

      I popped them out with a very, very thin punch. They have a head like carriage bolts and little chips will break off in the process. I then took one green up front and tapped it into the front (probably should have used a thin coat of some kind of glue). For the rear I took the red front and very carefully sliced it in half with an exacto knife. With the exacto I tapered one end of each half and then tapped each one back onto the rear sight. Careful when you cut the red one, hold ine end down with your finger keeping a close eye on the other half because it will fly and you could lose it. Could also check with Derya see if they offer the tubes by themselves?

      Comment

      • #4
        Capybara
        CGSSA Coordinator
        CGN Contributor
        • Feb 2012
        • 15081

        Originally posted by OLD-skool454#3
        I popped them out with a very, very thin punch. They have a head like carriage bolts and little chips will break off in the process. I then took one green up front and tapped it into the front (probably should have used a thin coat of some kind of glue). For the rear I took the red front and very carefully sliced it in half with an exacto knife. With the exacto I tapered one end of each half and then tapped each one back onto the rear sight. Careful when you cut the red one, hold ine end down with your finger keeping a close eye on the other half because it will fly and you could lose it. Could also check with Derya see if they offer the tubes by themselves?
        If Derya do sell them, they are not listed in the 10 pages of pistol parts on their website. The complete rear and front sights are just $9.99 a piece though.
        I know there are plenty of other suppliers for fiber optic tubes, I ordered the black and white set from Dawson, should be here next week.
        NRA Certified Metallic Cartridge Reloading Instructor, Shotgun Instructor and Range Safety Officer

        sigpic

        Comment

        • #5
          OLD-skool454#3
          Senior Member
          • Apr 2024
          • 554

          I didn't think about checking other manufacturers, that's a good idea.

          Comment

          • #6
            Grendel Guy
            Senior Member
            • Sep 2009
            • 2059

            Originally posted by Capybara

            If Derya do sell them, they are not listed in the 10 pages of pistol parts on their website. The complete rear and front sights are just $9.99 a piece though.
            I know there are plenty of other suppliers for fiber optic tubes, I ordered the black and white set from Dawson, should be here next week.
            Capy, does Dawson's sell just the inserts or the entire sight?

            Comment

            • #7
              Capybara
              CGSSA Coordinator
              CGN Contributor
              • Feb 2012
              • 15081

              Originally posted by Grendel Guy

              Capy, does Dawson's sell just the inserts or the entire sight?
              Dawson sells tons of other brand sights but nothing will fit on the Derya DY9 so far. But you can replace the inserts. https://dawsonprecision.com/fiber-op...son-precision/
              I am going to try white up front and blacking out the two rears as that's closest to my TruGlos I have on most of my other pistols.
              NRA Certified Metallic Cartridge Reloading Instructor, Shotgun Instructor and Range Safety Officer

              sigpic

              Comment

              • #8
                Grendel Guy
                Senior Member
                • Sep 2009
                • 2059

                So what's the correct diameter?

                Comment

                • #9
                  OLD-skool454#3
                  Senior Member
                  • Apr 2024
                  • 554

                  I was looking at tritium vials in 1.5 x 6 mm in both red and green may need some shrink tube to keep em in. The hi viz inserts I reversed measured something like 1.90/1.91mm x 10.1mm.

                  Comment

                  Working...
                  UA-8071174-1