Unconfigured Ad Widget

Collapse

**Update** πŸ“Œ Glock Trigger Connector Showdown OEM vs. Ghost Polished vs. Performance

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xounlistedxox
    Senior Member
    • Apr 2009
    • 2482

    **Update** πŸ“Œ Glock Trigger Connector Showdown OEM vs. Ghost Polished vs. Performance

    Recently picked up a Lyman Digital Trigger Pull Gauge and put it to use! I put four Glock trigger connectors to the test:
    1. Factory stock connector
    2. Factory connector with 0.25 trigger job & stoning
    3. Ghost Rocket 3.5lb with TCT
    4. Ghost Unit Performance Trigger (claimed 3lb)


    In this video, I break down the differences in feel, wall, creep, reset, and overall performance. Whether you're chasing the lightest break, a clean wall, or a balance for carry/duty useβ€”this comparison might help guide your next upgrade.


    The best part is that all of these in total cost about $70 in total to completely transform the triggers in all four Glocks here.


    Feedback and your own experiences are welcome & encouraged!


    Update based on some recommendations from folks for more consistency. Was it worth the time spent?






    Last edited by xounlistedxox; 05-13-2025, 8:36 AM.
  • #2
    smoothy8500
    Veteran Member
    • Sep 2009
    • 3846

    Cool video! Yes, it was informative regarding the merits of the various trigger mods and how you tested them.

    Comment

    • #3
      RAMCLAP
      Veteran Member
      • Nov 2012
      • 2880

      Good vid. I put the Ghost in both of mine. Honestly I don't know if it did a thing but they certainly don't hurt anything. Any easy mod for only a few bucks. As has been said a billion times, modifying Glocks is the surest way to turn them into malfunction machines.
      Psalm 103
      Mojave Lever Crew

      Comment

      • #4
        lexo98
        CGN/CGSSA Contributor
        CGN Contributor
        • Jan 2010
        • 673

        Anyone ever try any of the Glock Store Double Diamond ones? I know they have different versions

        Comment

        • #5
          xounlistedxox
          Senior Member
          • Apr 2009
          • 2482

          Originally posted by RAMCLAP
          Good vid. I put the Ghost in both of mine. Honestly I don't know if it did a thing but they certainly don't hurt anything. Any easy mod for only a few bucks. As has been said a billion times, modifying Glocks is the surest way to turn them into malfunction machines.
          I see people say this all the time, yet have never experienced it myself. 20+ years of Glock ownership with them being my primary EDC's for most of that time many many thousands of rounds through each of them of varying ammo types, including my own reloads.

          Comment

          • #6
            Spyder
            CGN Contributor
            • Mar 2008
            • 17001

            Originally posted by lexo98
            Anyone ever try any of the Glock Store Double Diamond ones? I know they have different versions
            Back when I was messing around with a bunch of parts, I liked these the best. Don't remember why, but I bought a couple more and stuck them in several pistols. Haven't compared anything else since and that was probably 7 or 8 or 9 years ago.

            Comment

            • #7
              lexo98
              CGN/CGSSA Contributor
              CGN Contributor
              • Jan 2010
              • 673

              Originally posted by Spyder

              Back when I was messing around with a bunch of parts, I liked these the best. Don't remember why, but I bought a couple more and stuck them in several pistols. Haven't compared anything else since and that was probably 7 or 8 or 9 years ago.
              A few years back I was at the San Diego store and bought a few. I never got around to installing them though

              Comment

              • #8
                TAS
                Probationary Member
                CGN Contributor - Lifetime
                • Jun 2009
                • 1256

                Good video, thanks for sharing. I know I changed out the connectors in a couple/few of my Glocks I acquired some time ago but nothing too crazy. I know at least one of them was a Ghost but not sure about the others. Your post is inspiring me to go through them again, figure out what each has, and then take measurements. I already have one of the Lyman scales to test, albeit it looks to be an older one than the one you have.
                NRA Life Member

                Comment

                • #9
                  checkenbach
                  Senior Member
                  • Nov 2008
                  • 1440

                  I have Taran Tactical kits in 3 of mine, they have the best feel to me. I also have an Apex drop in trigger in one, and is great as well, albeit more expensive. YMMV.

                  Comment

                  • #10
                    RAMCLAP
                    Veteran Member
                    • Nov 2012
                    • 2880

                    Originally posted by xounlistedxox

                    I see people say this all the time, yet have never experienced it myself. 20+ years of Glock ownership with them being my primary EDC's for most of that time many many thousands of rounds through each of them of varying ammo types, including my own reloads.
                    Just youtube armorers that deal with non-functioning Glocks.
                    Psalm 103
                    Mojave Lever Crew

                    Comment

                    • #11
                      xounlistedxox
                      Senior Member
                      • Apr 2009
                      • 2482

                      Originally posted by RAMCLAP

                      Just youtube armorers that deal with non-functioning Glocks.
                      Nah, I'd rather spend my time working on my Glocks that function lol. They are so extremely simple, I have no idea how you could make one not work, especially with how good the aftermarket parts have gotten. Back in the day there were a lot of questionable parts out there, but it doesn't seem like that anymore.

                      Comment

                      • #12
                        21SF
                        Veteran Member
                        • Oct 2010
                        • 3491

                        Oh look the site is working, could have just did a quick summary so we don’t have to watch a video 🀨
                        SA TRP Half rail, Glock 21SF, Spikes St-15, Ruger Alaskan .44, Saiga 7.62, GSSF Member
                        Diablo Rod & Gun Club
                        Originally posted by keenkeen
                        "What you've just posted is one of the most insanely idiotic things I have ever read. At no point in your rambling, incoherent post were you even close to anything that could be considered a rational thought. Everyone in this forum is now dumber for having read it. I award you no points, and may God have mercy on your soul."

                        Comment

                        • #13
                          xounlistedxox
                          Senior Member
                          • Apr 2009
                          • 2482

                          Originally posted by 21SF
                          Oh look the site is working, could have just did a quick summary so we don’t have to watch a video 🀨
                          That's not what I want to do why would I want to sit here and type a bunch of stuff when I can make a video, with visuals πŸ€”

                          Comment

                          Working...
                          UA-8071174-1