..........................
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Weird problem with SA Pro
Collapse
X
-
save up a little more and buy a Springfield...great customer service
-Coi- N R A member since 2008
.177-.22lr-.410-9mm-38spr-.45acp-45lc-7.62x39-7.62x54r-12ga
~your friendly neighborhood ZOMBIE hunter~Comment
-
Break in process. I fired the first 200 rounds in my loaded with no problems, but it could be that it was made to tighter specs and it has to wear in.Comment
-
-
Send it back! To much $ for any kinda problems!Comment
-
-Coi- N R A member since 2008
.177-.22lr-.410-9mm-38spr-.45acp-45lc-7.62x39-7.62x54r-12ga
~your friendly neighborhood ZOMBIE hunter~Comment
-
Gotcha.Comment
-
While there are in general several causes for failure to eject, due to it occurring on the last round of the magazine only I would bet that the extractor needs a bit more tension. With no round underneath to support it the extracted case its probably slipping down the breach face a bit and not clearing the ejection port.
For those interested other causes of failure to eject in the 1911 include load too light for the recoil spring/recoil spring too heavy for the load, worn extractor hook, loose or damaged ejector , loose grip, and lack of lubrication.
And as someone with many 1911's including full customs I'm on the Springfield Pro is a great 1911 bandwagon. All 1911's need maintenance over time and every 1911 owner should learn to adjust extractor tension if they plan on shooting it extensively. At least the Springfield Pro, like other SA products has a lifetime warranty from a company with great customer service if you should have a problem.Last edited by redcliff; 04-22-2012, 8:13 AM."You keep using that word. I do not think it means what you think it means."
"What we get away with isn't usually the same as what's good for us"
"An extended slide stop is the second most useless part you can put on a 1911"
"While Ruger DA revolvers may be built like a tank, they have the aesthetics of one also,
although I suppose there are a few tanks which I owe an apology to for that remark"Comment
-
+1.While there are in general several causes for failure to eject, due to it occurring on the last round of the magazine only I would bet that the extractor needs a bit more tension. With no round underneath to support it the extracted case its probably slipping down the breach face a bit and not clearing the ejection port.
For those interested other causes of failure to eject in the 1911 include load too light for the recoil spring/recoil spring too heavy for the load, worn extractor hook, loose or damaged ejector , loose grip, and lack of lubrication.
And as someone with many 1911's including full customs I'm on the Springfield Pro is a great 1911 bandwagon. All 1911's need maintenance over time and every 1911 owner should learn to adjust extractor tension if they plan on shooting it extensively. At least the Springfield Pro, like other SA products has a lifetime warranty from a company with great customer service if you should have a problem.
A stove pipe condition is generally from lack of extractor tension.Comment
-
Your extractor should be able to hold a loaded round while shaking the slide (with it off the frame, of course). You can easily change extractor tension.
Another reason (highly unlikely since SA uses standard springs on their Pro) is you are limp-wristing.
The fate of the wounded rest in the hands of the ones who apply the first dressing.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,791
Posts: 25,176,032
Members: 358,862
Active Members: 5,396
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 34104 users online. 49 members and 34055 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.



Comment