Unconfigured Ad Widget

Collapse

Aim help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • phaseshift
    Senior Member
    • Apr 2012
    • 835

    Aim help

    So as some of you may have already read my other thread about getting my first handgun. As suggested I went out and shot 4 different guns at my local range yesterday and the two that made the cut was the Glock 17 and the M&P 9.



    Note: I'm lefty and a left eye dominant shooter
    Glock 17: Bottom and Right(right at the get go my shots were pretty good)
    M&P 9: Top and Left(you can see that once I started to get the hang of the sites, the two groups became tighter)

    My question is on aim, I noticed that to get the bullet where I wanted it to go my front sight post had to be slightly higher than the rear site posts thus the two were not completely leveled as they are suppose to be. Why is that?
  • #2
    billped
    Veteran Member
    • Oct 2009
    • 2504

    Two items:

    1. You may be flinching as you fire, meaning you dip the barrel down. Try having a friend load a snap cap randomly in the magazine and have him/her watch you when you fire. It is not uncommon to dip the front of the gun 10-15 degrees which obviously isn't good for accuracy.

    2. What sight picture do you use from the choices below?

    Bill

    Comment

    • #3
      phaseshift
      Senior Member
      • Apr 2012
      • 835

      Originally posted by billped
      Two items:

      1. You may be flinching as you fire, meaning you dip the barrel down. Try having a friend load a snap cap randomly in the magazine and have him/her watch you when you fire. It is not uncommon to dip the front of the gun 10-15 degrees which obviously isn't good for accuracy.

      2. What sight picture do you use from the choices below?

      I tried to do two but my shots weren't going where I wanted them to be, three is more like it but the front sight is above the rear sights.

      Comment

      • #4
        skosh69
        Veteran Member
        • Aug 2011
        • 4290

        Comment

        • #5
          Kyle1886
          Veteran Member
          • Dec 2009
          • 4410

          Generally, Glocks have a "6 o'clock hold" as in figure 1 up above, I don't know about the M&P. (I think an exception may be my G35, still have not figured that one out yet).

          Respectfully
          Kyle
          Here's to Calguns.net, past, present, and the future 🍸🍸​🍷🍻 🍹
          iTrader = +3, %100, Location: N. San Diego Co
          https://www.calguns.net/forum/market...6#post54001874
          _________+__________

          Comment

          • #6
            gesundheit
            Senior Member
            • Dec 2011
            • 1147

            Originally posted by Kyle1886
            Generally, Glocks have a "6 o'clock hold" as in figure 1 up above, I don't know about the M&P. (I think an exception may be my G35, still have not figured that one out yet).

            Respectfully
            Kyle
            This is correct and also explains why you had to keep your front sight higher than rear to get point of impact = point of aim.

            If you were aiming for center, then the group on the right indicates you were jerking the trigger. Learn to be smooth with the trigger.

            Comment

            • #7
              phaseshift
              Senior Member
              • Apr 2012
              • 835

              oh just to clear it up, each group were intended to be where they were at. I chose 4 spots on the target to shoot my groups.

              Comment

              • #8
                gesundheit
                Senior Member
                • Dec 2011
                • 1147

                Then it is good shooting for a new shooter. How far away were you from the target?

                Comment

                • #9
                  phaseshift
                  Senior Member
                  • Apr 2012
                  • 835

                  Originally posted by gesundheit
                  Then it is good shooting for a new shooter. How far away were you from the target?
                  I believe it was between 8 - 10 yards.

                  Comment

                  • #10
                    nocomply25
                    Member
                    • Oct 2011
                    • 273

                    I think its good shooting for a new shooter. I know when i first started shooting i use to rush my shot a lot...as if i was in a hurry to shoot through the magazine for no reason at all. So make sure you slow down and breath and squeeze that trigger nice and slow to the rear, almost like a surprise when it goes off. That helped me get an idea of being smooth and then i added more speed to the pull...Just keep shooting and maybe tape yourself so you can take a look after you shoot to critique.

                    Comment

                    • #11
                      Xingu
                      Member
                      • Mar 2012
                      • 279

                      You can also have someone else load some snap caps randomly in some magazines. That way when you are supprised at no bang you will see if you flinch.
                      Originally posted by Frosty
                      If anything I'll be selling my time, resin, and access to a very specifically shaped cavity.

                      Originally posted by ExAcHog
                      I have read that...Serioulsy....check it out online.

                      Comment

                      • #12
                        9mmepiphany
                        Calguns Addict
                        • Jul 2008
                        • 8075

                        Originally posted by phaseshift
                        My question is on aim, I noticed that to get the bullet where I wanted it to go my front sight post had to be slightly higher than the rear site posts thus the two were not completely leveled as they are suppose to be. Why is that?
                        It is very hard to make recommendations when we don't know it's displacement from the aiming point or if you are using a shifting POA/sight alignment.

                        I'd recommend you try shooting from a rest to see if it is the sights or your technique
                        ...because the journey is the worthier part...The Shepherd's Tale

                        Comment

                        • #13
                          Dirty Monkey
                          Member
                          • Sep 2010
                          • 285

                          Where are you located at? maybe get some coffee and go to the range.

                          Also, not everyone is built the same.

                          Comment

                          • #14
                            phaseshift
                            Senior Member
                            • Apr 2012
                            • 835

                            Originally posted by 9mmepiphany
                            It is very hard to make recommendations when we don't know it's displacement from the aiming point or if you are using a shifting POA/sight alignment.

                            I'd recommend you try shooting from a rest to see if it is the sights or your technique
                            by rest you mean setting the gun down on the table? and shooting that way?

                            Comment

                            • #15
                              9mmepiphany
                              Calguns Addict
                              • Jul 2008
                              • 8075

                              Actually I'd recommend that you put your range bag on the table and rest your wrist/hands on it. Don't rest the butt of the pistol on a hard surface. Since you're not holding up the weight of the gun, there isn't a reason for your arms to get tired...so take your time squeezing the trigger slowly straight back.

                              Don't look at the target between shots and don't chase your shots...just hold consistent sight alignment on the same center. I'd recommend shooting at 1" squares and firing no more than 5 shots on each square
                              ...because the journey is the worthier part...The Shepherd's Tale

                              Comment

                              Working...
                              UA-8071174-1