CZ75B magazines

[Voodoo Rufus]

I have a CZ75B SA 9mm. Since I'm moving to CA soon, I wanted to see if there's a way to disassemble the mags in order to convert them to 10rd capacity, and if there are commercial mag blocks available. Or, do I have to just break down and spend the $ on new 10rd mags?

Thanks.

[paintballdad]

I would just disassemble them and pick up a few 10 rd mags. That way you will still have the normal capacity mags if you ever leave the state again.

[railroader]

Since cz factory mags run about $40 or so you could just take your factory mags apart before you get here. Buy some mec-gar mags before you move. They run a little over $20 and convert those to ten rounders. You can also watch ebay and the czforum for deals on 10 round factory mags.

[paul0660]

Since cz factory mags run about $40 or so you could just take your factory mags apart before you get here. Buy some mec-gar mags before you move. They run a little over $20 and convert those to ten rounders. You can also watch ebay and the czforum for deals on 10 round factory mags.

This, and commercial mag blocks are not available.

[Steph]

Stupid question....if a magazine is listed for the CZ 75, is there a difference from that working with the CZ 75B model?

Here's some for a really good price: http://www.triplek.com/Products/id/38/grp/412/prd/633/

[Rhythm of Life]

The 75 models I believe will not work on pre B guns.

I could be wrong and I'd wait for a second opinion.

__You can always through a light weight plastic customed trimmed plastic block into the mag well to make your own 10/17 or w/e mag blocks.

[zfields]

The 75 models I believe will not work on pre B guns.

I could be wrong and I'd wait for a second opinion.

__You can always through a light weight plastic customed trimmed plastic block into the mag well to make your own 10/17 or w/e mag blocks.

Just remember it has to be permanent.

[Rhythm of Life]

Just remember it has to be permanent.

You mean the pre B mags become fixed when used in post mag well guns?

If so, new to me and great to know.

[Steph]

These are 10rd mags for $30, I just want to make sure they'll work with my 75b.

[railroader]

Stupid question....if a magazine is listed for the CZ 75, is there a difference from that working with the CZ 75B model?

Here's some for a really good price: http://www.triplek.com/Products/id/38/grp/412/prd/633/

Pre B mags will work in B guns but not always visa versa. I have some pre B mags and they are slightly narrower at the top. As for triple K mags those are the bottom of the barrel. Baby eagle mags will work in a 75b. They feed fine but you might have to take a little off the slide stop so the rounds don't bump it up. Those mags are $30 http://www.magnumresearch.com/Expand...uctCode=MAG910

[Rhythm of Life]

Pre B mags will work in B guns but not always visa versa. I have some pre B mags and they are slightly narrower at the top. As for triple K mags those are the bottom of the barrel. Baby eagle mags will work in a 75b. They feed fine but you might have to take a little off the slide stop so the rounds don't bump it up. Those mags are $30 http://www.magnumresearch.com/Expand...uctCode=MAG910

Great!

Nice to know.

[Steph]

Pre B mags will work in B guns but not always visa versa. I have some pre B mags and they are slightly narrower at the top. As for triple K mags those are the bottom of the barrel. Baby eagle mags will work in a 75b. They feed fine but you might have to take a little off the slide stop so the rounds don't bump it up. Those mags are $30 http://www.magnumresearch.com/Expand...uctCode=MAG910

Good info. I'd rather not take any chances just to save $10, thanks for the advice.

[railroader]

Just watch the cz forum. Used factory
10 rounders pop up now and then for about $20 or $25. http://www.czfirearms.us/index.php?topic=46305.0