Unconfigured Ad Widget

Collapse

H&K USP 9mm problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • HKROB
    Senior Member
    • Nov 2006
    • 820

    H&K USP 9mm problem

    I have a problem with my uspf 9mm about every 150rds I get a FTE with WWB ammo I have shot 200rds of other ammo with no problems.I am thinking about replacing the extractor & recoil spring.This is an older usp with an unknown round count.I also have a uspf .45 and eats everything I feed it.
  • #2
    sammy
    Veteran Member
    • Oct 2006
    • 3847

    When the pistol cycles normally, where do the extracted shells land?

    Comment

    • #3
      HKROB
      Senior Member
      • Nov 2006
      • 820

      Originally posted by sammy
      When the pistol cycles normally, where do the extracted shells land?
      off to my right not sure how far I shoot at an indoor range and the booth is kinda small.

      Comment

      • #4
        2ma2
        Junior Member
        • Nov 2006
        • 59

        FWIW I have a sig X5 that ftes wwb all the time, I even returned it for warranty work. It works fine with Federal AE!! I measured several brands of 9mm at the extractor lip of the case and to my surprise they were not all the same, WWB has the smallest dimension of the cases I measured. IMHO if an extractor is less than perfect it will show up first with wwbs.

        Comment

        Working...
        UA-8071174-1