Problem with my glock

[Bobula]

Especially after you watch someone else do it first huh?
You won't believe my trigger now that I added both setscrews.
Travel is down around 1/8" total.

That sounds awesome!

[savasyn]

Especially after you watch someone else do it first huh?
You won't believe my trigger now that I added both setscrews.
Travel is down around 1/8" total.

Watching assuredly helped me know that it would go back together without too much fuss. I figured out how to pull the slide internals on my own, though

I'll have to check out the trigger stops next time I'm over.

[proraptor]

Especially after you watch someone else do it first huh?
You won't believe my trigger now that I added both setscrews.
Travel is down around 1/8" total.

There might be a chance your drop safety doesnt work with that short of a trigger pull.....you might want to check it

[5968]

I'm pretty sure they're unrelated, The rear of the guide rod appears to be dragging on the frame. There is a cone shaped indentation where it looks like the guide rod was rubbing the frame.

If it is, the guide rod isn't properly seated on on the barrel lug.

[Bobula]

If it is, the guide rod isn't properly seated on on the barrel lug.

There aren't any cracks on the barrel or lug, I'm just gonna buy a new guide rod, it's due for one anyway.

[ar15barrels]

There might be a chance your drop safety doesnt work with that short of a trigger pull.....you might want to check it

I'm quite certain that the drop safety does not work anymore.
This is a competetion gun.
It has all the same safeties as an unlocked series 70 1911 with a pinned grip safety.

[Bobula]

Okay, one last question for you glock experts.
On my barrel is the serial FNS*** the glock logo then a pentagon.
What's the pentagon? I've seen some odd marked glock but never a pentagon

[5968]

There aren't any cracks on the barrel or lug, I'm just gonna buy a new guide rod, it's due for one anyway.

That is a good thing (no cracks). When you get your new guide rod, just make sure that that you properly seat it on the barrel lug when you reassemble it.

[ar15barrels]

What's the pentagon?

It's glocks way of denoting that the barrel has polygonal rifling.

[U2BassAce]

Seen that on my old G38 and G39.

[tyrist]

It has to be normal wear I just checked by G35 and G23 both have that exact same wear. I had never noticed it till now. G35 has about 5000 rounds. G23 has about 2000

[Greg-Dawg]

It has to be normal wear I just checked by G35 and G23 both have that exact same wear. I had never noticed it till now. G35 has about 5000 rounds. G23 has about 2000

I like your choice of Glocks, here are mine...OD Green baby!