Unconfigured Ad Widget

Collapse

DOES ANYONE KNOW?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rallo87
    Member
    • Oct 2008
    • 303

    DOES ANYONE KNOW?

    Where i can get a set of grip screws and bushings for a 1911 locally in the southbay? I just recieved a set of vz operators 2 for my new kimber stainless 2 and i had to sacrifice my bushings trying to get them off
  • #2
    PRCABR4Christ
    Senior Member
    • Dec 2009
    • 954

    why did you have to sacrifice your bushings? just pop them out from inside the mag well with your finger...

    I would think the gun shop in Milpitas would have some, but I wouldn't know for sure...if not there I would look at the one in CV on Redwood...I would suggest calling them
    Good saddles ain't cheap...and cheap saddles ain't good

    I have a custom spur and western decoration business! http://www.facebook.com/pages/JH-Spurs/211804625565944 & http://www.etsy.com/shop/JHSpurs?ref=si_shop

    Comment

    • #3
      rallo87
      Member
      • Oct 2008
      • 303

      thanks for your imput guys. i apologise i should have specified im in the longbeach area

      Comment

      • #4
        dirtykoala
        Banned
        • Dec 2008
        • 3476

        Originally posted by rallo87
        Where i can get a set of grip screws and bushings for a 1911 locally in the southbay? I just recieved a set of vz operators 2 for my new kimber stainless 2 and i had to sacrifice my bushings trying to get them off
        i called kimber and they sent me some for free.

        Originally posted by rallo87
        thanks for your imput guys. i apologise i should have specified im in the longbeach area
        thats not the south bay, thats southern california.

        Comment

        • #5
          rallo87
          Member
          • Oct 2008
          • 303

          ya i couldnt pop them out i had to use channel locks with tape but couldnt do it without damaging 3 out of 4

          Comment

          • #6
            rallo87
            Member
            • Oct 2008
            • 303

            if i cant find any i will call kimber. just impatient lol

            Comment

            • #7
              dirtykoala
              Banned
              • Dec 2008
              • 3476

              Originally posted by jessegpresley


              Comment

              • #8
                dirtykoala
                Banned
                • Dec 2008
                • 3476

                Originally posted by jessegpresley
                Dirtykoala, what are you relating that I did not say in my first post?
                that the "south bay" in so cal doesnt count.

                Comment

                • #9
                  PRCABR4Christ
                  Senior Member
                  • Dec 2009
                  • 954

                  Originally posted by jessegpresley
                  How are you able to "pop" out bushings with your finger if they've been tapped, which is the SOP for bushing installation?
                  it sounded to me like he ruined the bushings by taking the grips off, I meant for him to remove the grips with his finger...

                  SOP for installing bushing are threading in with loctite and/or staking them in, otherwise they may come out too easily...I prefer staking them in
                  Last edited by PRCABR4Christ; 11-17-2011, 12:21 AM.
                  Good saddles ain't cheap...and cheap saddles ain't good

                  I have a custom spur and western decoration business! http://www.facebook.com/pages/JH-Spurs/211804625565944 & http://www.etsy.com/shop/JHSpurs?ref=si_shop

                  Comment

                  • #10
                    FNH5-7
                    Calguns Addict
                    • Sep 2009
                    • 9407

                    Are those grips the super thin kind? I had to install slim bushings in order to properly install my frag grips. The slim bushings came from VZ as well.
                    Originally posted by FalconLair
                    I weep for my country and what it is becoming.

                    Comment

                    • #11
                      PRCABR4Christ
                      Senior Member
                      • Dec 2009
                      • 954

                      Originally posted by Colt-45
                      Are those grips the super thin kind? I had to install slim bushings in order to properly install my frag grips. The slim bushings came from VZ as well.
                      thats what I thought at first...but I would like to think he wouldn't be able to get the grips on without ruining them with standard bushings...then again, I've been surprised before lol
                      Good saddles ain't cheap...and cheap saddles ain't good

                      I have a custom spur and western decoration business! http://www.facebook.com/pages/JH-Spurs/211804625565944 & http://www.etsy.com/shop/JHSpurs?ref=si_shop

                      Comment

                      • #12
                        MA2
                        Senior Member
                        • Mar 2009
                        • 1129

                        I highly recommend a grip bushing driver to install the new grip bushing.

                        Comment

                        • #13
                          redcliff
                          Calguns Addict
                          • Feb 2008
                          • 5676

                          Originally posted by MA2
                          I highly recommend a grip bushing driver to install the new grip bushing.
                          http://www.brownells.com/.aspx/pid=4...VER-trade-BITS
                          And just an added note, there are two different bushing drivers, one for thin bushings and a standard one. Personally I have both.

                          I'm a little confused why the OP had to remove the bushings, unless he needed to go from standard to thin bushings, and if so a large straight blade screwdriver filling the bushings slot works better than pliers.

                          If the bushings were the correct size and just came off with the grips, I always just clean them with alcohol, add a dab of loctite to the bushing threads, and then reinstall the grips. Let it dry and the screws should seperate from the bushings easily.
                          "You keep using that word. I do not think it means what you think it means."
                          "What we get away with isn't usually the same as what's good for us"
                          "An extended slide stop is the second most useless part you can put on a 1911"

                          "While Ruger DA revolvers may be built like a tank, they have the aesthetics of one also,
                          although I suppose there are a few tanks which I owe an apology to for that remark"

                          Comment

                          • #14
                            rallo87
                            Member
                            • Oct 2008
                            • 303

                            thanks for all of your imput guys! and redcliff that is a good idea i regret not trying it. oh well live and learn. fortunately i was able to purchase a set from the gunsmith at ammo bros. i think im going to fit them and blue locktight them in place. from what i was told kimber doesnt steak the bushings for some odd reason?

                            Comment

                            Working...
                            UA-8071174-1