Unconfigured Ad Widget

Collapse

XD mag issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Laser Sailor
    Senior Member
    • Aug 2010
    • 614

    XD mag issues

    Hello all, I'm having an issue with my XD.

    A 12rnd mag loads and drops normally, smooth as silk. But a 10 rounder always gets stuck in the mag well, I have to pull it out with my off hand.

    Anybody seen this? Is it just that my low cap mags are "fatter"?
    Common sense is so rare these days that it really ought to be classified as a superpower.
    ATTN FEDERAL AGENTS: I DON'T ACTUALLY OWN ANY GUNS, I'M JUST HERE FOR THE EGO BOOST.
  • #2
    FRIZZLEFRY
    Member
    • Dec 2008
    • 112

    I have five mags each for my two different model XDs and mine all fall out freely when I hit the mag release. And all my mags are ten rounders.
    Last edited by FRIZZLEFRY; 09-12-2011, 5:15 PM.

    Comment

    • #3
      epcii
      Senior Member
      • Feb 2011
      • 637

      Check the top rear lip of the magazine that sits against the rim of the case. Is it bulging outward? If so, try bending them flat with some pliers. Bulging in that area is known to be caused by jams, especially with SWC's.
      sigpic
      Ask not for a lighter burden, but for broader shoulders
      NRA Member

      Comment

      • #4
        Sonic_mike
        CGN/CGSSA Contributor
        • Aug 2009
        • 3483

        If you are trying to eject loaded magazines then push up on the bottom of the mag first,then eject.

        Comment

        • #5
          Bigtwin
          Veteran Member
          • May 2010
          • 2639

          I am not sure why you have this problem. Out of all my 10 round mags they all drop freely full or empty. Though full I have to press the release harder when full(but not that much).
          Last edited by Bigtwin; 09-12-2011, 7:53 PM.
          NRA MEMBER

          Comment

          • #6
            Sheepdog1968
            Senior Member
            • Jun 2009
            • 1903

            Per OP is it just one bad 10 round magazine? Have you tried other 10 round magazines? Kind of hard to diagnose with so few details.
            RIP Louis Awerbuck. I miss you and your training.

            Comment

            • #7
              Laser Sailor
              Senior Member
              • Aug 2010
              • 614

              It's two of my 10 rounders that have this problem, they don't drop out when empty. I don't see any buldging or bent lips.

              I've contacted SA to see what they say.
              Common sense is so rare these days that it really ought to be classified as a superpower.
              ATTN FEDERAL AGENTS: I DON'T ACTUALLY OWN ANY GUNS, I'M JUST HERE FOR THE EGO BOOST.

              Comment

              • #8
                epcii
                Senior Member
                • Feb 2011
                • 637

                What caliber is it? Maybe you have .45 mags.
                sigpic
                Ask not for a lighter burden, but for broader shoulders
                NRA Member

                Comment

                • #9
                  sleepercar
                  Senior Member
                  • Oct 2009
                  • 568

                  Maybe they're just not "drop free" magazines..

                  Comment

                  • #10
                    Laser Sailor
                    Senior Member
                    • Aug 2010
                    • 614

                    The mags are marked .40S&W on the baseplate.

                    Originally posted by sleepercar
                    Maybe they're just not "drop free" magazines..
                    They had better be, this is my duty weapon we're talking about...
                    Last edited by Laser Sailor; 09-12-2011, 9:11 PM.
                    Common sense is so rare these days that it really ought to be classified as a superpower.
                    ATTN FEDERAL AGENTS: I DON'T ACTUALLY OWN ANY GUNS, I'M JUST HERE FOR THE EGO BOOST.

                    Comment

                    • #11
                      zfields
                      CGN Contributor
                      • Aug 2010
                      • 13658

                      call springfield, there CS is awesome.
                      Sandstorm Custom Rifle Slings : Custom Paracord slings

                      10% off slings for calguns members. PM for details. Like us on facebook!

                      Comment

                      • #12
                        daybreak
                        Senior Member
                        • Dec 2010
                        • 1735

                        All 5 of my 10 rounders drop effortlessly full and empty. Call Springfield

                        my YouTube shooting channel

                        Comment

                        • #13
                          Cokebottle
                          Seņor Member
                          CGN Contributor - Lifetime
                          • Oct 2009
                          • 32373

                          Originally posted by sleepercar
                          Maybe they're just not "drop free" magazines..
                          XD magazines should be "drop-free"
                          I've only heard of a few that were not, and those were from the mid/late 90s.

                          All of my XD9 mags drop fine.
                          - Rich

                          Originally posted by dantodd
                          A just government will not be overthrown by force or violence because the people have no incentive to overthrow a just government. If a small minority of people attempt such an insurrection to grab power and enslave the people, the RKBA of the whole is our insurance against their success.

                          Comment

                          • #14
                            Boilermaker
                            Junior Member
                            • Mar 2007
                            • 93

                            I've come across this on a few, all of them were fixed with a slight
                            tweek in on the upper front (bullet) side

                            Comment

                            • #15
                              sk8804
                              Senior Member
                              • Mar 2010
                              • 721

                              take your slide off, and insert while looking down into the magwell from the top of the frame. See if you can figure out whats hanging them up.

                              Comment

                              Working...
                              UA-8071174-1