Unconfigured Ad Widget

Collapse

Ruger SR9c Trigger

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mrkam
    Senior Member
    • Jun 2008
    • 636

    Ruger SR9c Trigger

    I picked up my brand new SR9c last week, and I have taken a liking to the little gun. As I expected, the trigger wasn't fabulous. I decided to break it in a little with over a hundred dry-fires (with snap caps) as I heard that helps when it's right out of the box. It felt acceptable, but I was thinking about picking up one of those aftermarket "trigger bars" just to help smooth it out a little and maybe lighten the pull.

    However, I felt like taking out the magazine disconnect today, since I don't really care for it, using this video for instruction. http://www.youtube.com/watch?v=xvS-LhKLw2Q

    After that, I dry fired it, and it felt quite a bit better than before, so I hooked the trigger up to an electronic scale. With the magazine disconnect, it fired at around 7 to 7.25 pounds (the scale would only flash it for a moment and it probably wasn't the most variable-free system, so I couldn't get super precise.) Without the magazine disconnect, I was surprised when it fired at around 6 pounds! Unfortunately, I didn't think to weigh the trigger pull when I first got it. I hadn't really seen that much discussion about removing the magazine disconnect when I researched the SR9, so I thought that might be interesting for any fellow SR9 owners on here if they wanted to try it and maybe lighten up their trigger pulls too.
    Last edited by mrkam; 09-07-2011, 7:20 PM.
  • #2
    UserM4
    Senior Member
    • Apr 2010
    • 1687

    Yeah, it's pretty well known that if you remove the mag disconnect, it lightens and even smooths out the trigger pull. Glad to hear that you found out early enough. It's obviously a mod done at your own discretion. I personally don't feel a need for the mag disconnect as most of my guns never had one in the first place.
    While we're here arguing about the latest high tech running shoes, there's some Kenyan out there running barefoot. Guess who's gonna win the marathon?

    Comment

    • #3
      morfeeis
      Calguns Addict
      • Apr 2010
      • 7605

      I just removed mine after reading your thread and i have to say the trigger is much better with the mag in after removing the disconnect, i must say though when dry firing with the mag out and a snap cap in the chamber i didn't always get a predictable braking point on the trigger. i even had a few pulls where i had the trigger (in my mind at least) pulled all the way back and it never broke, i would then release the trigger and repull and it would break.

      update!
      it got better, i just had to break in the newer pull, all is fine and much better now.
      Last edited by morfeeis; 08-08-2011, 2:21 PM.
      ΜΟΛΩΝ ΛΑΒΕ
      Originally posted by Ayn Rand
      You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death we wish to avoid, but life that we wish to live.

      Comment

      • #4
        mrkam
        Senior Member
        • Jun 2008
        • 636

        UserM4: Yeah, now that I've searched "SR9 magazine disconnect," it is pretty easy to find, but before I got it, I just never saw it in my searches of "Ruger SR9" so thought I could try to spread the word if others were unaware. I'm glad I found out early enough too.

        morfeeis: Glad to help! I'm still thinking of getting one of those aftermarket trigger bars, and that might make the trigger smoother (I've heard reports of them not lightening the trigger, but greatly smoothing it.) I might update this thread later to include my thoughts and weight measurement with the trigger bar once I get it.

        Comment

        • #5
          Cutest
          Member
          • Jun 2011
          • 199

          Does this void the warranty?

          Comment

          • #6
            mrkam
            Senior Member
            • Jun 2008
            • 636

            I heard some question that in the Ruger forums, and the guys on there thought that since it's just a piece that you take out (not modify or destroy,) and since you can pop it right back in again in less than a minute, it wouldn't. If you're really concerned about it, you could contact Ruger and ask them.

            Also, the aftermarket trigger bar company (Ghost) assures that it won't void the warranty since you are just taking out the Ruger trigger bar and putting a different one in. Since that doesn't, I doubt taking the mag disconnect out does.

            Comment

            • #7
              1JimMarch
              Senior Member
              • Jul 2008
              • 1803

              It doesn't void the warrantee.

              The only issue is, if you ever send the gun in to Ruger, put the disconnector back in. If you don't, they'll install it at the factory again and they *might* bill you for it.

              Ruger hates FrankenRugers. Mine is so heavily modded it can never visit the factory again, ever.

              Comment

              • #8
                morfeeis
                Calguns Addict
                • Apr 2010
                • 7605

                Originally posted by 1JimMarch
                It doesn't void the warrantee.

                The only issue is, if you ever send the gun in to Ruger, put the disconnector back in. If you don't, they'll install it at the factory again and they *might* bill you for it.

                Ruger hates FrankenRugers. Mine is so heavily modded it can never visit the factory again, ever.
                what all have you done to your SR9, i'd love to see pics!
                ΜΟΛΩΝ ΛΑΒΕ
                Originally posted by Ayn Rand
                You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death we wish to avoid, but life that we wish to live.

                Comment

                • #9
                  mrkam
                  Senior Member
                  • Jun 2008
                  • 636

                  I was intrigued by the FrankenRuger too, haha. Mine isn't very modified yet. Maybe once I've got it how I like it I'll post pics, but perhaps they belong in the Ruger picture thread. http://www.calguns.net/calgunforum/s...d.php?t=346415 (which you incidentally started) You'll see mine on there eventually.

                  Comment

                  • #10
                    InGrAM
                    Veteran Member
                    • Dec 2010
                    • 3699

                    Originally posted by morfeeis
                    I just removed mine after reading your thread and i have to say the trigger is much better with the mag in after removing the disconnect, i must say though when dry firing with the mag out and a snap cap in the chamber i didn't always get a predictable braking point on the trigger. i even had a few pulls where i had the trigger (in my mind at least) pulled all the way back and it never broke, i would then release the trigger and repull and it would break.

                    update!
                    it got better, i just had to break in the newer pull, all is fine and much better now.
                    This is EXACTLY what happened to my M&P when I removed my magazine disconnect safety and performed a trigger job on it. Weird. But I must say the trigger is MUCH better now that I have used it a bit. lol

                    Comment

                    • #11
                      mrkam
                      Senior Member
                      • Jun 2008
                      • 636

                      Originally posted by InGrAM
                      This is EXACTLY what happened to my M&P when I removed my magazine disconnect safety and performed a trigger job on it. Weird. But I must say the trigger is MUCH better now that I have used it a bit. lol
                      Huh, weird, that didn't happened to me... I can't speak for the M&P, but maybe you forgot to insert a magazine to push the extractor back up?

                      Comment

                      • #12
                        morfeeis
                        Calguns Addict
                        • Apr 2010
                        • 7605

                        Originally posted by mrkam
                        I was intrigued by the FrankenRuger too, haha. Mine isn't very modified yet. Maybe once I've got it how I like it I'll post pics, but perhaps they belong in the Ruger picture thread. http://www.calguns.net/calgunforum/s...d.php?t=346415 (which you incidentally started) You'll see mine on there eventually.
                        I use to have a link to that thread in my signature, i need to do a family photo of the family.

                        Originally posted by InGrAM
                        This is EXACTLY what happened to my M&P when I removed my magazine disconnect safety and performed a trigger job on it. Weird. But I must say the trigger is MUCH better now that I have used it a bit. lol
                        yeah, i was seconds away from putting it back in, i thought i had messed up but it's a much better trigger now. I should add that i have a post #331 SR9 with the half moon mag release and those triggers are said to have been improved by Ruger.
                        ΜΟΛΩΝ ΛΑΒΕ
                        Originally posted by Ayn Rand
                        You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death we wish to avoid, but life that we wish to live.

                        Comment

                        • #13
                          mrkam
                          Senior Member
                          • Jun 2008
                          • 636

                          Hmm, what do you guys think about me getting a Ghost 3.5 Ultimate connector? I've heard some people say that it only lightens it a little, but changes the pull to a smoother, creepier pull. I'm pretty satisfied with my trigger now, but if I could make it lighter, it might be worth it.

                          Comment

                          • #14
                            Speedpower
                            Senior Member
                            • Jul 2010
                            • 2238

                            The trigger on my SR9c significantly smoothed out After shooting about 600 rounds through it.

                            Comment

                            • #15
                              redhemi
                              Veteran Member
                              • Nov 2009
                              • 2970

                              I put the Ghost Ultimate in my SR40 and if it lighten the trigger its not much as for smoother so far just a little but I only ran 50 rounds through it maybe more is needed I'll find out as I shoot it more.

                              Comment

                              Working...
                              UA-8071174-1