Favorite Glock Connector

[locosway]

I've been happy with my 3.5 Ghost Connector, but I'm curious to try this one:

http://www.lonewolfdist.com/Detail.aspx?PROD=362&CAT=161

But, I like the way the NY1 spring feels, so I would probably opt to do the 3.5 w/ NY1 spring to keep me at 4.5lbs but to change the pull so it's more consistent through it's travel.

http://www.lonewolfdist.com/Detail.aspx?PROD=156076&CAT=15

[vintagearms]

I have the stock connector, stock trigger spring and only the Vanek trigger bar in my Glock. Lessoned the pre-travel just a bit and I retain the excellent felt reset.

[IPSICK]

Best trigger parts I have felt that require no additional work from the user are from Glocktriggers.com

Unfortunately, they do not sell the connector separately. However on the plus side, the trigger bar is very smooth and mates with the connector perfectly which should be considered necessary anyways.

The ZevTech/Glockworx parts I've used needed a lot of dremel polishing to feel nearly as nice as the Glocktriggers.com parts.

IMO, the Glocktriggers.com trigger also seemed more reliable. Admittedly, I have kept the ZevTech/Glockworx parts in my Glock but only after tons of polishing and even more testing to insure reliability. I kept the Glockworx parts because their trigger bar eliminated more pre-travel than the Glocktriggers.com trigger bar.

[DRAB_81]

I have also tried several 3.5# connectors, as well as a Vanek Classic Grand Master Trigger Kit. ALL my Glock Triggers are stock, or back to stock now. I have learned to love the stock trigger, and I shoot better with them anyway.

[drunktank]

OP I have a Scherer connector I can send you if you want to try it out. Just send it back to me when you are done comparing it.

[RollingCode3]

OP I have a Scherer connector I can send you if you want to try it out. Just send it back to me when you are done comparing it.

Thanks for the offer. I have shot Glock with Scherer connector installed before. Thanks again.

[Mr.1904]

Stock 3.5 in my 21

[l8apex]

Ghost is slightly lighter than the (-) factory connector. The (.) factory is about the same as the Ghost. Schearer (sp?) Is about the same as the factory. No experience with LW. Running Ghost on the Gen 3 and the (.) Factory on the the Gen 4 19.

[RollingCode3]

Ghost is slightly lighter than the (-) factory connector. The (.) factory is about the same as the Ghost. Schearer (sp?) Is about the same as the factory. No experience with LW. Running Ghost on the Gen 3 and the (.) Factory on the the Gen 4 19.

I plan to get the Ghost Ranger connector for my GLock 19Gen4 and the "dot" connector for my GLock 26Gen4.

[sammy]

I tried a Ghost 3.5# connector and it gave a nice lighter pull. The down side is after 300 rounds it stopped working. The trigger went dead for lack of a better term. Went back to the factory connector and the gun worked fine. From that point on all I use is the lighter G34 connector in all my Glocks.