Hello, need help with glockworx trigger.

[nsginc]

Hello, I need help with a glockworx zev tech trigger. I dont have the directions. Nothing on the web site. It has turned my glock 35 into a single shot. Have to drop the mag to clear. Then one shot, drop mag to clear. Any help would be great. Thank you.

[locosway]

So, you pull the trigger, it goes bang, but the slide doesn't cycle?

[nsginc]

Yeah, but it tries to feed. I just cant release the slide to feed the round. I have to clear the jam first.

[Oceanbob]

Yeah, but it tries to feed. I just cant release the slide to feed the round. I have to clear the jam first.

I'am not clear on the problem..(Before coffee )

Pointing the weapon in a safe direction and keeping your finger OFF the trigger, can you cycle rounds thru the weapon (racking the slide) until the slide stays open when the magazine is empty..?

[CALI SHOT DOC]

hard for me to tell without actually seeing it happen (or any pics lol) but i think it might have to do with the extractor. I heard of one story where the extractor was somehow put in backwords. Is the slide lock lever correctly installed. Maybe it's popping up after you shoot not allowing the slide to go all the way back?

Make sure the back assembly is down all the way. are all your pins in?
possibly try a different mag and examine the mag you are using to see if there are any signs of damage that can give you an idea of what exactly is causing this issue.

[locosway]

Yeah, but it tries to feed. I just cant release the slide to feed the round. I have to clear the jam first.

So, the spent casing is not being ejected and you're getting a double feed?

Or the casing is being ejected and the round is getting hung up on the feed ramp?

The trigger really has nothing to do with what you've described so far.

[HighLander51]

If the slide is locking back, after every round, then you put the pins in the wrong order for the slide stop. The small pin has to go first so the spring on the slide stop is under it.

Glock extractors can only go in one way.

[locosway]

If the slide is locking back, after every round, then you put the pins in the wrong order for the slide stop. The small pin has to go first so the spring on the slide stop is under it.

Glock extractors can only go in one way.

If this is the case, then why is he having to remove the magazines and clear the "jam" as he put it?

I think we need a lot more info from the OP on this, cause it just doesn't make sense.

[HighLander51]

If this is the case, then why is he having to remove the magazines and clear the "jam" as he put it?

Need to know more; maybe he doesn't realize that you can just release the slide. Photos are always more helpful than descriptions. And of course, there is always missing information, or irrelevant information.

[Craigy]

Hello, I need help with a glockworx zev tech trigger. I dont have the directions. Nothing on the web site. It has turned my glock 35 into a single shot. Have to drop the mag to clear. Then one shot, drop mag to clear. Any help would be great. Thank you.

Give us a call and we can help you.

310-230-5135.

Craig
Glockworx

[nsginc]

I might have had the slide lock installed wrong. My brother suggested that. When I removed it did seem caught on something. It is install correct now. Could have it caused a fail to feed? Pushing the slide lock did nothing. Thank you everyone for your help.

[locosway]

I might have had the slide lock installed wrong. My brother suggested that. When I removed it did seem caught on something. It is install correct now. Could have it caused a fail to feed? Pushing the slide lock did nothing. Thank you everyone for your help.

The only thing you can do wrong is by not having the spring set properly. Did you install the top pin first and then install the slide lock lever?

[nsginc]

Really dont remember, first time doing it. Very possible I did it wrong.

[locosway]

Next time install the top pin, then the slide stop lever, then the bottom pin. It's fool proof that way.

[The Cable Guy]

Just call Glockworx, Ray or Craig will set you straight, if all else fails, they'll take care of you.