CZ-75b conversion to decocker only possible?

[deadcoyote]

My CZ-75b has the safety and no decock on it. Is it doable to convert this model to a decock with no safety? I know, dumb question to some but I'm in the dark here.

[zonzin]

My CZ-75b has the safety and no decock on it. Is it doable to convert this model to a decock with no safety? I know, dumb question to some but I'm in the dark here.

Cocked and Locked,, 1911 style only.

[Woodworker2]

Attached is a page for the CZ75 Owners' Manual. It looks like it is "possible", if CZ would sell the 6 or so parts required for the conversion.

[DrewTheBrave]

Check out the CZ Custom Shop and ask Angus if it's possible. If anyone can do it, he's your man.

[Paradiddle]

Why do that? You can lower the hammer safely if you are careful, or carry it cocked and locked as God and Browning have decreed!

[deadcoyote]

Check out the CZ Custom Shop and ask Angus if it's possible. If anyone can do it, he's your man.

Thanks for the link, here's from the FAQ section:

Is there any way to convert a non-decocker to a decocker?
No, the cuts in the frame are different.

[deadcoyote]

Why do that? You can lower the hammer safely if you are careful, or carry it cocked and locked as God and Browning have decreed!

I typically walk the hammer down and carry without the safety engaged. just a little bit too much of a pucker moment. Guess I'll just need to retrain and go cocked and locked.

[limitdown]

Point the gun in a safe direction.
Grip the hammer between your thumb and forefinger of left hand. Hold this firmly.
Pull the trigger with your right hand.
Slowly let the hammer down.

It's safe to carry it this way because there is a firing pin block.

Don't decock 1-handed cowboy style, .